2.5 m³ Vessel Oily Water Separator

2.5 m³ Vessel Oily Water Separator

Introduction

YWC-2.50 type device is mainly constituted by the 1^st stage coalesce, the 2^nd stage filter, the 3^rd stage membrane, electric control box, oil content meter, MONO pump, pneumatic valve, pressure controller, temperature controller and so on.

The device adopts electrical heating; the 1^st stage cone wave plate gravity and coalesce separation; the 1^st and the 2^nd stage fiber filter and the 3^rd stage membrane permeation in order to make the treated bilge water meet the requirements of discharge standard of the resolution of IMP MEPC.107 (49).

No.	Name	Material
1	the 1st stage coalescer	Assembly
2	the 2nd stage filter	Assembly
3	the 3rd stage membrane	Assembly
4	Base	8#
5	Piston pump	Assembly
6	Oil content meter	Assembly
7	Electric control box	Assembly
8	Water inlet pipe	Q235-B
9	Cock	Copper
10	Electrode	Assembly
11	Pneumatic valve	Assembly
12	Thermometer	Assembly
13	Nameplate	316L
14	Duplex pressure gauge	Assembly
15	Vacuum pressure gauge	Assembly
16	Nameplate	316L
17	Water inlet pipe	Q235-B
18	Pneumatic valve	Assembly
19	Globe valve	Assembly
20	Back to the bilge pipe	Q235-B
21	Manual three-way valve	Assembly
22	Exhaust pipe	Q235-B
23	Flow rate meter	Assembly
24	Three water inlet pipe	Q235-B
25	Check valve	Assembly
26	Safety valve	Assembly
27	Medical pump	Assembly
28	Recoil hoses	Q235-B
29	Medical box	Plastic

Rated Capacity (m3/h)	Discharged Water Oil Content	Electric Heater Power (KW)	Electric Motor Power (KW)	Electrical System	Suction Head	Discharged Water Pressure	Outline Dimension (mm)(L×W×H)	Base	Dry Weight	Wet Weight	Applicable Vessel (KDWT)
2.5	≤15ppm	6	1.5	AC 380V/50Hz/3φ, AC 415V/50Hz/3φ, AC 440/60Hz/3φ, AC 480V/60HZ/3φ, etc.	≤6m (H2O)	5-10m (H2O)	1900×1120 ×1900	8#	1500	2800	50-100

IACS Certificate Options: BV, CCS, NK, DNV, GL, IRS, ABS, LR, RMRS, RINA