30 Persons Simplified Marine Sewage Processor

30 Persons Simplified Marine Sewage Processor

Introduction

The Sewage Treatment Plant device is mainly constituted by aeration tank,contact oxidation tank, settling tank, membrane tank, cutting pump, air pump, discharge  pump, electric control box, membrane module,UV sterilizer and accessories of pipe lines.

The SWCM (I) marine domestic sewage treatment plant uses the principles of activated sludge, contact oxidation and membrane bioreactor (MBR) to eliminate organic pollutants. Membrane bioreactor can treat wastewater efficiently, thoroughly and cleanly, so that the discharged water can meet the new IMO standards and other more stringent requirements.

Equipment List

Type	SWCM(Ⅰ)-30
Rated/MaxCapacity	30persons/33persons
Total Suspended Solids	≯35mg/l
Biochemical Oxygen Demand（BOD5）	≯25mg/l
Thermotalerant Coliform Standard	≯100/100ml
Chlorine Residual	≯0.5mg/l
Chemical Oxygen Demand(COD)	≯125mg/l
PH	6～8.5

Main Component Data
Cutting pump	Type：0.5CWF-8	1Set
	Material (shell, impeller, shaft)：Assembly
	Capacity:5m3/h
	Power and protection grade:0.75KW F class
Air pump	Type：2RB 210-7AH16T	1Set
	Material (shell, impeller, shaft)：Assembly
	Capacity:80m3/h
	Power and protection grade：0.55KW F class
Discharge pump	Type：25ZB-2-20	1Set
	Material (shell, impeller, shaft)：Assembly
	Capacity: 2m3/h
	Power and protection grade:0.75KW F class
UV disinfectant	Type：JX-0.5UV	1Set
	Power Supply：AC220V  50HZ  3P
Electric control box	Type：321DF-1M-01YL	1Set
	Power Supply：

IACS Certificate Options: CCS, ABS, BV, LR, DNV.GL, NK, KR, RMRS, RINA.