Marine Wastewater Processor

Marine Wastewater Processor

1. Marine Wastewater Processor General:

The marine wastewater processor belongs to the key device for prevention of pollution for ships in seas and oceans according to the revised Annex IV of the International Convention of the Prevention of Pollution (MARPOL 73/78).

This device is according to the MEPC.227(64) resolution enacted on 5th, October, 2012. Which only used to the "black water" from toilet fecal sewage. In the treating process, to add any dilution water, gray water (from washing room), and sea water are forbidden. This device is also not suit for the passenger vessels which on the Baltic Sea. This device is regardless of the total nitrogen and total phosphorus performance index requirements.

This device is apply to install on the below vessels later 1st, January, 2016:

(1) All areas of the vessel (expect passenger vessel);

(2) The passenger vessel beyond of the Annex IV of the International Convention of the Prevention of Pollution (MARPOL 73/78 ).

2. Marine Wastewater Processor Advantages:

(1) Adopting horizontal circular design, ellipse closures on both ends, pressure resistance and compact structure.
(2)The device is adopted auto-control, and compliance with the requirement of 24-hours unattended cabin.
(3)Adopting the "MBR" technology, allow devices to narrow the size, and solve the conflict of small space of cabin, but big volume of device.
(4) The intermittent aeration in bio-membrane tank and hollow fiber membrane tank, form the process of 'aerobic - anoxic', and resolve the problem of 'nitrogen and phosphorus removal'.
(5) The device is adopting the principle of air-lifting to transfer the sludge from sediment tank and membrane tank to aeration tank, mealtimes the pump stops and air never stopped, so as the scale on the membrane surface comes down. Due to back flushing and clean the membrane online USD technology patent, so the life of membrane can be prolonged at least 8 to 9years.
(6) "On-line" cleaning technology, making the dirt on membrane off automatically, recover membrane flux. It can be solved the problem of opening the cleaning or replacement of membrane difficultly caused by the small space in cabin.
(7) The effluent after further treatment can be reached at the requirement of water reuse.

3. Marine Wastewater Processor Models and Main Technical Parameters:

Model		SWCM(I)-
		15	20	25	30	40	50	60	80	100	120	150	200	250	300	400
Load	Average load （L/d）	1190	1540	1890	2310	3080	3780	4480	6020	7700	9100	11200	14700	18200	23100	30800
	Peak load （L/h）	149	193	237	289	385	473	560	753	963	1138	1400	1838	2275	2888	3850
	Organic load (kgBOD5/d）	0.595	0.77	0.945	1.155	1.54	1.89	2.24	3.01	3.85	4.55	5. 6	7.35	9.10	11.55	15.4
Rated capacity （men）		15	20	25	30	40	50	60	80	100	120	150	200	250	300	400
Max capacity（men）		17	22	27	33	44	54	64	86	110	130	160	210	260	330	440
Electricity		AC 380V/50Hz/3φ, AC 415V/50Hz/3φ, AC 440, 60Hz/3φ, etc.
Power （kW）		2.5	2.5	2.5	2.5	3.0	3.0	3.5	4.0	4.0	4.0	6.0	6.0	7.0	9.0	11
External dimension （mm） L×W×H		1870 × 1200 × 1450	1680 × 1400 × 1570	1890 × 1400 × 1560	1980 × 1500 × 1650	2320 × 1600 × 1700	2320 × 1700 × 1880	2650 × 1700 × 1860	2800 × 1900 × 2090	2800 × 2100 × 2300	3030 × 2100 × 2300	3090 × 2250 × 2390	3640 × 2250 × 2390	3890 × 2450 × 2580	4790 × 2450 × 2600	5980 × 2450 × 2600
Weight	Dry weight（kg）	1000	1000	1100	1200	1300	1450	1600	1850	2200	2300	2800	3000	3300	3700	4200
	Wet weight（kg）	2283	2640	2740	3500	4400	5073	5270	6517	8268	9166	11340	13267	16538	20357	25417
Effluent standard		BOD5≤25 Qi/Qe mg/L, COD≤125Qi/Qe mg/L, TSS≤35 Qi/Qe mg/L, coliform≤100/100ml, PH6～8.5, CL2≤0.5mg/L

4. Marine Wastewater Processor Several Class Certificates Supply:

ABS, BV, DNV, GL, LR, RINA, NK, USCG, and CCS class certificates.