Ship Aluminum Sliding Window

Ship Aluminum Sliding Window

Introduction

It is a type of sliding window, and it is appropriate for the wheelhouse and superstructure above the freeboard deck of various vessels. Two shapes are provided: square angel and round angel. Made of aluminium, the color and the size can be customized according to clients’ demands. The quality is identified by the standard of CB/T3765-1996. IACS certificates like CCS, NK, BV, DNV.GL, LR, ABS, RINA, IRS, RMRS, etc. are provided to be chose.

parts

Configuration Option

parts	material	Pros and Cons
Glass	Toughened glass	The strength is several times higher than that of ordinary glass, the fragile property is improved, and the resistance to rapid cold and heat is higher than that of ordinary glass.
	Normal Glass	The light transmittance of ordinary glass is good, and its surface is smoother than tempered glass, but its strength and safety are worse than that of toughened glass.
Window frame and seat	Q235-A	But the finished product is heavier and its antirust ability is worse than that of aluminum.
	LF5 Aluminum	Anti-corrosion, but expensive and not fireproof
	Copper	High strength, high hardness
Seal	Neoprene	Excellent Watertight performance
Tension device	LF5	Anti-corrosion, but expensive and not fireproof
	SS304	rustproof, less brittle, but the strength is low.

Comparison Differences

Other manufacturer’s low quality marine sliding window	HI-SEA high quality marine sliding window
1. The glass cuts corners, adopts non-tempered glass, and the glass thickness is thin, the structure is fragile and fragile, and the sharp edge after rupture has caused harm to the human body. 2. The glass window frame adopts the metal structure with high impurity content, the cost is low, and the strength is not up to standard. 3. The window edge sealing material has poor ductility, is easy to deform, and cannot guarantee watertightness. 4. Improper surface treatment of castings and defects such as cracks and pores will affect the service life of portholes.	1. The glass adopts a multi-layer tempered glass structure, which not only has high strength, but also better safety, and has a certain sound insulation function. 2. The material standard refers to CB/T 3765-1996, which conforms to the marine specification 3. After the parts are processed, anti-rust treatment such as hot-dip galvanizing or anodizing is performed. 4. The window shall be tested be water pressure and there shall be no water droplets on the impacted part. 5. All inspection items for portholes are in compliance with the requirements.

no.	cleare size	sub clear size	frame size		cutout in steel wall	glass external size		qty	weight
	W×h	W×h×r			W3×h3×r3				Kg
			W1×h1×r	W2×h2×r2		T	W4×h4×r4		t=8	t=6
1	740×500	355500×50	825×588×94	890×650×125	840×600×100	6,8	373×518×58	20	20	18.9
2	830×560	400×560×50	918×648×94	980×710×125	930×660×100		418×578×58	24	21.9	20.7
3	930×630	450×630×100	1018×718×144	1080×780×175	1030×730×150		468×648×108	26	24.8	23.3
4	1030×710	500×710×100	1118×798×144	1180×860×175	1130×810×150		518×728×108	30	28	26.1
5	500×630	235×630×50	650×780×125	650×780×125	600×730×100		253×648×58	18	18.6	17.8
6	600×710	285×710×50	750×860×125	750×860×125	700×810×100		303×728×58	22	21.5	20.4
7	750×800	360×800×50	900×950×125	900×950×125	850×900×100		378×818×58	26	25.6	24

Optional Certificates: CCS, NK, BV, IRS, RINA, RMRS, DNV.GL, LR, ABS

Product Figures: