Suction Valve - GB Marine Valve - Hi-sea

MARINE & OFFSHORE EQUIPMENT

INDUSTRY EQUIPMENT

STOCK LIST

Contacts

tel. Tel:+86-23-67956606
tel. FAX:+86-23-67956622
email Email:manager@cqhisea.com

Working Time: 9:00--17:00

Working Day: Monday to Friday Website: www.cqhisea.com




Home > GB Marine Valve

Suction Valve

Suction Valve

Introduction

A suction valve is a type of valve used in fluid handling systems to control the flow of fluids, typically in a suction line. A suction line is a pipe or conduit that carries a fluid, such as water, fuel, or oil, from a tank or reservoir to a pump or other device that will further process the fluid. Suction valves are installed in the suction line to regulate the amount of fluid that flows through the line and to prevent backflow of the fluid.

Application

Suction valves are commonly used in a wide range of industries, including marine, oil and gas, and chemical processing. In marine applications, suction valves are typically used in the engine room to control the flow of seawater, fuel, and other fluids.

List

(1) GB T2029-80 Marine Cast Steel Suction Sea Valve

(2) GB T2030-80 Marine Bronze Suction Sea Valve

(3) GB T11691-1989 Cast Steel Suction Sea Valve

(4) GB T11692-1989 Bronze Suction Sea Valve

Configuration Selection:

Part name

Material

Advantages / Disadvantages

Valve Body

Bronze

1. Seawater corrosion resistance;
2. The price is slightly higher than that of cast steel and cast iron;

Cast Steel

1. High mechanical strength and toughness;
2. It has special properties such as heat resistance, corrosion resistance and wear resistance;
3. The price is lower than that of bronze and higher than that of cast iron;

Cast Iron

1. Not corrosion resistant;
2. The price is lower than that of bronze and cast steel;

Spool

Bronze

1. Strong low temperature resistance;
2. Seawater corrosion resistance is stronger than stainless steel (304, 316);
3. The price is slightly higher than that of stainless steel;

Stainless Steel

1. It has strong tensile, anti-wear and corrosion resistance, and will not produce corrosion, pitting, corrosion and wear;
2. Stronger than copper;
3. High temperature resistance;

Valve Stem

Stainless Steel 304

1. Acid and alkali resistance;
2. High temperature resistance;
3. The price is lower than stainless steel 316;

Stainless Steel 316

1. It is more corrosion-resistant and acid resistant than stainless steel 304;
2. The price is slightly higher than that of stainless steel 304;

Valve Cover

Bronze

1. Seawater corrosion resistance;
2. The price is slightly higher than that of cast steel and cast iron;

Cast Steel

1. High mechanical strength and toughness;
2. It has special properties such as heat resistance, corrosion resistance and wear resistance;
3. The price is lower than that of bronze and higher than that of cast iron;

Handwheel

Csat Iron

The price is lower than that of bronze and cast copper

The differences are as follows：

Product drawings of other low-quality suppliers

Our factory manufactures products

Low quality product features

Consequence

Features of our products

Achieve results

1. Insufficient raw materials;
2. The processing method is not standard

The wall thickness is uneven, the material distribution is uneven, the valve body is easy to be damaged, and the service life is short

It is processed in strict accordance with the standard, with uniform wall thickness and material

The product has high safety factor and long service life

1. Made of iron and carbon steel;
2. Use the recovered scrap valve to repair and then sell it again;

The hardness and accuracy of the valve cannot meet the needs of use, and the shell is easy to crack, resulting in running, emitting, dripping and leakage, and even causing oil and gas pipeline explosion

Select high-quality materials according to customer needs, and make new products in strict accordance with standards

The hardness and accuracy of the valve meet the standard quality requirements to ensure the normal operation of the equipment

To improve profit margin, purchase cheap unqualified bolts

Unqualified valve bolts lead to safety hazards, which is easy to cause accidents

Make new valves in strict accordance with the material requirements of customers, and never substitute inferior products for good ones

Meet the hardness and accuracy requirements of standard valves, ensure the quality of valves and ensure the normal operation of equipment

Flange manufacturing quality is poor, with cracks, pores, insufficient thickness and other problems

It leads to wear resistance and poor pressure bearing of the valve, and the valve is prone to quality problems, which makes

short service life

Adopt standard bolts with quality assurance in strict accordance with customer requirements

Improve safety factor and prolong service life

In order to reduce the cost, cast iron valve core is used instead of bronze valve core

Cast iron valve core is easy to be corroded and damaged

Select standard materials in strict accordance with customer requirements

The product structure is reasonable and the safety factor is high

In order to reduce costs, ordinary round steel valves are used instead of stainless steel valves

1. The diameter of valve rod fails to meet the requirements;
2. The performance of alternative materials is unstable, without heat treatment, the quality can not meet the standard, and the service life is short

1. Made of stainless steel;
2. The diameter of valve rod meets the design requirements;
3. High temperature quenching and tempering heat treatment

The product has reasonable structure, high safety factor and long service life

Drawing

① Body: Cast Tin Bronze

② Cover: Cast Tin Bronze

③ Disc: Cast Tin Bronze

④ Stem: Aluminum Bronze

Parameter performance:

standard

GB

medium

Fresh water, sea water

brand name

Customer required

material

Cast steel, bronze

application

Repair ship, shipbuilding

OEM service

available

certificate

ABS, BV, DNV, CCS, LR, NK, KR, RINA.



Product Showing:

Certificates:


Related products for "Suction Valve"

Contact with us now

Our mail: hs@cqhisea.com

replace