Open Type Lifeboat
Description:
The open type lifeboat meets the general requirements of LSA rules on lifeboat construction, buoyancy, stability, and equipment. The hull of lifeboat is made of the fiber reinforce plastic (F.R.P).
Characteristics:
1. The space between the inside and outside hull is filled with polyurethane foam which will supply sufficient buoyancy for the boat.
2. The boat will be afloat with the help of the foam even the part of boat underneath the water damaged.
Apllication: This type of boat is used for the life-saving on the sea.
Adopt standard:
Open Lifeboat is designed and built to the latest SOLAS regulations, LSA and MSC 81.(70).
Open Lifeboat is fitted with the latest "Spearhead" On- Off load rescue Boat release systems which can evacuate crew safely and efficiently from vessels and offshore platforms.
Open Lifeboat is also armed with air case to meet requirements of roll on ships, LSA, MSC81 (70).
Drawing of open type lifeboat:
Length (m)
L
3.50
4.50
5.20
6.00
7.05
7.5
8.00
Hook distance (m)
L1
2.83
3.80
4.50
5.30
6.00
6.50
7.00
Breadth (m)
B
1.60
1.86
2.10
2.10
2.35
2.55
2.65
Depth (m)
D
0.80
0.85
0.95
0.95
1.03
1.05
1.10
Hook height FWD (m)
H1
0.76
0.81
0.91
0.91
0.96
1.10
1.18
Hook height AFT (m)
H2
0.76
0.81
0.91
0.91
0.96
1.10
1.18
Craft weight (kg)
695
770
1364
1320
1730
1887
2249
Persons
(p)
7
10
16
22
33
43
52
Full Load (kg)
1220
1520
2564
2970
4205
5112
6149
Speed (knots)
≧10km/h
≧6knots
Engine
ZS1100
ZX2105C-1
Power (HP)
15
24
Rotate speed (rpm)
2200
1500
Particulars
|
Comparison of lifeboat types |
|
|
Open type lifeboat |
An open lifeboat is a traditional lifeboat that has no cover and only a temporary roof. It provides poor crew protection. |
|
Totally enclosed lifeboat |
The fully enclosed lifeboat is equipped with a rigid closed roof, which can protect the crew from cold and heat. The hull of the fully enclosed lifeboat and the material of the rigid enclosed roof are flame retardant or non-combustible. |
|
Partially enclosed lifeboat |
Partially closed lifeboats are provided with rigid roofs only at the bow and stern. The length of the head and tail cover should not be less than 20% of the length of the boat. The middle part is provided with a folding top cover, which forms a windproof cover with the rigid top cover of the head and tail. |
Picture of open type lifeboat:
Related products for "Open Type Lifeboat"
