Liferaft Light
Application:
The liferaft light consists of external light with wire, internal light with wire and battery. The external light and internal light are connected with battery by two individual wire connectors. The battery powers both internal and external lights. When the liferaft is inflated, the battery can be activated by pulling out "O" ring and both lights are activated at the same time. The external light is a high intensity flashing light. It is mounted in the surface of the liferaft to signal for rescue. The internal light is an adequate steady light for reading inside a covered liferaft. The two units are sealed and watertight.
Specification:
Type | Luminous Intensity Of Exterior Light | Luminous Intensity Of Interior Light | Operation Voltage | Flash Frequency | Certificates |
IMO-1 |
≥4.3cd |
≥0.5cd |
≥12h |
50~70time/min | CCS/CE |
IMO-2 |
≥4.3cd |
≥0.5cd |
≥12h |
50~70time/min |
CCS/CE |
IMO-3 |
≥4.3cd |
≥0.5cd |
≥12h |
50~70time/min |
CCS |
SZ-902 |
≥4.3cd |
≥0.5cd |
≥12h |
50~70time/min |
CCS/ZY |
SZ-903 |
≥4.3cd |
≥0.5cd |
≥12h |
50~70time/min |
CCS/ZY |
Quality Assurance And Service
1. Having a complete and rigorous management, production and inspection processes to control the quality and avoid any mistake of details
2. Design and produce ability
3. Rigorous inspection including incoming inspection, flaw detection, double check, etc.
4. Advanced factory facility
5. (Engineers or tech supporters) Responsing to any inquiry within 24 HRS
6. Providing professional customizing service according to client's requirements
7. Rigorous production schedule and professional follow-up process ensuring on time delivery
Photo:
Various Models For Your Choose