0.4㎡ Plate Heat Exchanger
Basic Information
The MBR0.4 plate heat exchanger is mainly composed of stainless steel pressed heat transfer plates, sealant pads, clamping bolts, pressed plate frames and other components. Resistant to various corrosive media. The heat transfer efficiency is high, and the hot and cold media flow through the adjacent plates through their channels. Due to the presence of herringbone waves on the plate, the flow of the medium forms turbulence, thereby obtaining a higher heat exchange efficiency.
The plates of the plate heat exchanger are all independent parts, and the heat exchange area and heat exchange process can be increased or decreased according to user requirements. The sealing groove is provided with a drainage channel, so that various media will not collude, and even if there is a leakage, it will be discharged outside.
Technical Specifications
| Monolithic heat transfer area m³ | 0.4095 | Flange: Dn mm | 125 |
| Plate spacing mm | 4 | working temperature ℃ | ≤180 |
| Cross-sectional area of single flow channel ㎡ | 0.001353 | Working Pressure MPa | 0.6,1 |
| Max.processing capacity m³/h | 200 | Angle hole diameter mm | 125 |
| Plate material | ss304,316,316L | Corrugation height | 3.3 |
Related products for "0.4㎡ Plate Heat Exchanger"
