DN700 Dredge Gate Valve
Application
Dredge gate valve is to open and close pipe lines for slurry transportation on dredge vessels or ships. The diameters is from 250 to 1400mm. It has low pressure(8kpa), medium pressure(15kpa) and high pressure(15kpa). The gate valve features a gate or blade that can be raised or lowered to control the flow of materials and water through the pipeline. By adjusting the position of the gate, operators can regulate the volume and velocity of the material being discharged during dredging activities.
The main features are as follows
1.A polished knife gate is installed, made out of stainless steel.
2.The proven design and technology are widely used in the dredging industry.
3.The gate valves are equipped with electric open/closed sensors.
4.Special dimensional requirements such as mounting dimensions of the gate valve an be met upon request.
Drawing Of Product
Technical Parameters
| 1.Working Pressure PN≤1.6Mpa | |||||||
| DN | H1(mm) | H2(mm) | b(mm) | d(mm) | K(mm) | D(mm) | n-Th |
| 700 | 525 | 2955 | 900 | 318 | 840 | 895 | 24-M27 |
| we can modify the parameters,according to your requirements. | |||||||
| 2.Working Pressure PN≤2.5Mpa | |||||||
| DN | H1(mm) | H2(mm) | b(mm) | d(mm) | K(mm) | D(mm) | n-Th |
| 700 | 565 | 3013 | 900 | 540 | 875 | 945 | 24-M33 |
| we can modify the parameters,according to your requirements. | |||||||
Related products for "DN700 Dredge Gate Valve"
