Tank Cleaning Equipment

Tank Cleaning Equipment

1. Preface of Tank Cleaning Equipment

Tank cleaning machine type YQJ B/Q is designed for cleaning the tanks of oil tankers and chemical tankers. Dimension, structure and cleaning requirements of the tanks are the standard for design, it’s necessary to estimate above information before installation. Tank cleaning machine type YQJ B/Q is fixed type for installation and it also can be used as portable tank washing machine. We can supply fixed support for portable type in order to reduce the labor intensity which shall be marked out when place the order. Tank cleaning machines are made of copper alloy or stainless steel which has the effect of antirust and antiseptic.

2. Installation Guide of Tank Cleaning Equipment

Tank cleaning machine type YQJ B/Q shall be installed in the vertical position. Both fixed type and portable type has a strainer installed in the inlet of tank cleaning machine in order to prevent from blocking. The connector between tank cleaning machine and pump can be flange or screw joint, in order to supply the correct accessories, customers shall give the requirements when placing order.
Individual stop valve and pressure meter shall be installed in each tank cleaning piping in order to control the hydraulic pressure for tank cleaning machine. Individual stop valve and pressure meter shall be installed in each tank cleaning piping in order to control the hydraulic pressure for tank cleaning machine.

3. Tank Cleaning Equipment Working Principle

Tank cleaning pump shall supply cleaning medium to tank washing machine. When cleaning medium enters tank washing machine, it drives impeller, worm wheel, gear rotating to make the nozzles and shell rolling at horizontal and vertical direction in 360° in order to wash every part of the tanks with emitted water.
Gear box is lubricated by cleaning medium instead of oil or grease.
A full cycle is created when the main body has rotated 44 turns. YQJ B（Q）-50 with a rotation speed of 3rpm which is under normally working pressure of 0.6-0.8MPa will take approx 15 min to wash a full cycle of the tank. YQJ B(Q)-60 with a rotation speed of 2rpm which is under normally working pressure of 0.6-0.8MPa will take about 25min to wash a full cycle of the tank. Attention that the practical time depends on hydraulic pressure.

4. Tank Cleaning Equipment Details

Related products for "Tank Cleaning Equipment"