Steel Fluorescent Pendant Light
Products Characteristic:
The lamp housing is stretched and formed by high-quality cold-rolled sheet, and the surface is treated with white acid-proof epoxy polyester powder. The lampshade is injection molded with transparent impact-resistant polycarbonate, and the lampshade seal is made of foamed silicone rubber for good sealing performance. In order to ensure the safety of electricity, both inside and outside of lamps is equipped with Connection Bridge. Configured compensating capacitors in inside of light to improve the power factor and reduce losses. The main components of light be fixed on the reflector, convenient to remove for serving. The cable outside diameter is φ11~φ13mm.
Production Authentication:
Conform to standard of IEC60598-1-2008
Conform to RULES FOR CALSSIFICATION OF SEA-GOING STEEL SHIPS.
Approved by China Classification Society (CCS)
Passed the European Union (CE) CERTIFICATION
Specification:
|
Type |
Power |
Voltage |
Power Factor |
Lamp Holder |
Cable Outside Diameter |
Protection Class |
Weight |
|
JCY27-1B |
1×20W |
110V/60Hz 220V/50Hz 220V/60Hz |
＞0.85 |
G13 |
φ8~φ16 |
IP67 |
7.2kg |
|
JCY27-2B |
2×20W |
|
Type |
Power |
Voltage |
Power Factor |
Lamp Holder |
Cable Outside Diameter |
Protection Class |
Weight |
| JCY28-1 |
1×20W |
110V/60Hz 220V/50Hz 220V/60Hz |
>0.85 |
G13 |
φ8~φ16 |
IP67 |
4.5kg |
| JCY28-2 |
2×20W |
4.5kg |
|||||
| JCY48-1 |
1×40W |
8.0kg | |||||
| JCY48-2 |
2×40W |
8.0kg | |||||
| JCY28-2B |
2×20W |
4.5kg | |||||
| JCY48-2B |
2×40W |
8.0kg |
Drawing of Steel Fluorescent Pendant Light JCY22-2:
Drawing of Steel Fluorescent Pendant Light JCY24-2:
