Port Boarding Ladder
1. General Description of Port Boarding Ladder
The conventional boarding equipment accomplish the purpose by accommodation ladder of tanker. During the development of oil dock, latter-day size oil dock, special naked pier, dock surface is discontiguous and too high in elevation, the ship bump and drift continually and strongly during operation. Distance between the shipboard in berth and the edge of dock is too long because of the large fender, in this condition, it is difficult to settle the contact between ship and dock with accommodation ladder. So as to accelerate loading work of tanker and ensure that people is safe during board and disembarking, the boarding ladder almost become a necessary equipment same as marine loading arm at oil dock.
The boarding ladder must have good technical performance for the environment though its function is simple. For adapting to the fluctuation of ship to dock and the happenchance, a detail analysis about information of hydrography, weather and ship which shall arrive of the port will be carried out during design, to confirm the suitable operation condition and choose the correct scheme and reliable preventive measure so as to attain anticipative purpose.
2. Port Boarding Ladder Characteristics
(1) The material of ladder body is aluminum alloy, it is light and safe.
(2) Adopt four-link mechanism for steps, and steps will keep in horizontal when the ladder changing in a range of minus 45 degrees to 60 degrees.
(3) The triangle ladder and front ladder are connected with single point, so that the land wheel under triangle will still keep contacting with deck of ship steadily and be immune from influence from bump of ship and inequality.
(4) The hydraulic system is arranged suitably, weather proof and convenient to maintain.
(5) Locking performance of the lifting mechanism is firm and interlocked.
(6) The electric control system is designed independently by our company and adopt domestic and international products of famous manufacturer for main components, has reliable quality and good performance.
(7) The wireless remote made operating more convenient.
3. Guide for selecting Port Boarding Ladder
Selection of boarding ladder shall be carried out according to dock capacity, change of tide, condition of dock surface and cost performance. Customer should fill the following parameter list and submit it to the manufacturer so as to confirm the envelop range, basal dimension and load information of boarding ladder.
(1) Terminal Parameters
|
NO. |
description |
data |
|
1 |
distance between the centre of boarding ladder and the edge of dock |
m |
|
2 |
the standard elevation of dock |
m |
|
3 |
design the highest water level |
m |
|
4 |
design the lowest water level |
m |
|
5 |
nature thickness of protecting shipboard |
m |
|
compressed thickness of protecting shipboard |
m |
|
|
6 |
voltage of power supply |
V |
|
7 |
frequency of power supply |
HZ |
(2) Vessel Data
|
NO. |
description of data |
data |
|
1 |
minimum distance between vessel flange axis and deck |
m |
|
2 |
maximum distance between vessel flange axis and deck |
m |
|
3 |
the thickness of protecting shipboard |
m |
|
4 |
transverse drift(perpendicular to deck) |
m |
|
5 |
total fore and aft drift(parrel to the deck) |
m |
|
6 |
sinkage value of vessel |
m |
(3) Environment Data
|
description of data |
item |
data |
|
maximum design wind velocity（10 meter upon the lowest water level, 3 seconds gust） |
reset state |
m/s |
|
movement/lap joint state |
m/s |
|
|
earthquake’s factors |
probability coefficient of earthquake Z |
G |
|
force acceleration of earthquake |
degree |
|
|
environment temperature |
Highest |
℃ |
|
lowest |
℃ |
Related products for "Port Boarding Ladder"
