When the Electric heat eye washer is not activated, the water in the device is in a liquid state due to the heat generated by the electric heating cable wound around the water pipe. This will not cause the water supply in the pipeline to affect the water supply due to low temperature icing, so that the emergency shower eyewash device can supply water normally and start normally. And when the temperature is low, the valve of the key components in the device will not be brittle at low temperature, and will not affect the use effect. It is noted that the electric heating cable is a non-heater and has a certain heating time, so it only plays a role in heating the water in the device when the eye wash device is not activated.
Body Material
SS 304
Base
Stainless steel
Standard
ANSI Z 358.1-2014
Flow
≥75.7 L/min
Height (the shower basin from the
ground)
2083-2438 mm
Distance(the shower to the obstacle)
≥406 mm
Water Outlet diameter
≥508 mm
Eye wash flow
≥11.4 L/min，Lasting 15 minutes or more
Height（Eye wash head to
floor height）
838-1143 mm
Inlet and outlet aperture
DN 32
Eyewash outlet height
≥203 mm
Related products for "Electric heat eye washer"
