FRP Biogas Pool
Product Characteristic：
1. Molded products, easy to install. The product is an industrial molded product, the installation time is only a few hours, the installation is completed, and the filler can be used the next day.
2. Light weight, convenient transportation. The total weight of a pool is only one or two hundred kilograms, which is made separately and is easy to transport.
3. Advanced technology and reasonable design. The volume of the ellipsoid is used, the depth of the embedding is shallow, the bottom of the fermentation is large, the circulation of the feces is facilitated, and there is no blind zone of fermentation, and the gas production is high.
4.The pool body is well sealed and has high strength. Determined by the properties of FRP, combined with the use of special composite materials, its strength, sealing, compression resistance, anti-aging, wear resistance, and thermal insulation are stronger than concrete digesters.
5.The pool body does not crack long life. The pool body is not easy to crack, and it can be used for up to 30 years without maintenance.
Product Specification：
|
volume |
6 cubic meters |
8 cubic meters |
|
Diameter（m） |
2.3±0.03 |
2.3±0.03 |
|
Weight （kg） |
170±5 |
195±5 |
|
Wall thickness （mm） |
6±1 |
6±1 |
|
Tensile strength（Mpa） |
4.7±0.5 |
4.7±0.5 |
|
Bending strength （Mpa） |
6.6±1 |
6.6±1 |
|
Bus hardness |
60±5 |
60±5 |
|
Water absorption rate |
0.4±0.1 |
0.4±0.1 |
