Electric Anchoring Winch
Application
An electric anchoring winch is a type of winch that is used on boats and ships to anchor the vessel in place. It is powered by electricity and consists of a winch drum that is used to store a length of anchor chain or rope. The electric anchoring winch is typically mounted on the deck of the vessel and is controlled by an operator using a control panel or remote control. The operator can use the winch to control the movement of the anchor chain or rope and adjust the tension on it to ensure that the vessel remains securely anchored in place. Overall, the electric anchoring winch is a powerful and reliable tool that is used on boats and ships to anchor them securely in place. It is a critical piece of equipment for any vessel that spends time at sea and is an essential component of marine safety.
Advantages
1. Compact structure, high strength;
2. Excellent performance, exquisite appearance;
3. Corrosion resistance, long lifespan;
4. Reliable service, high security;
5. Easy installation, easy maintenance;
6. With or without warping head;
7. With single or double anchor chain gypsy;
8. Local control or remote control;
9. Manual or hydraulic clutch and brake;
10. General motor or explosion-proof motor;
11. Auto tension control, rope length or speed measurement;
12. Certificate: CCS, BV, LR...
Electric Anchoring Winch Structure
We not only provide customers with high-quality products, but also provide complete system solutions and added services for specific customers. Therefore, There are high competitiveness.
Configuration options
Part Name
Type/Material
Advantages/Disadvantages
Drum
Q235-A
It has good toughness and plasticity, has a certain elongation, and has good weld-ability and hot work-ability. Q235A is generally used in the hot-rolled state. CCS no longer needed Q235A.
Q235-B
Has a certain elongation, strength, good toughness and cast-ability, easy to stamp and welding. Suitable for products with small loads.
Q345-B
Good comprehensive performance, good low temperature performance, good cold stamping performance, good welding performance and machinability. (High strength, good welding performance).
Warping head
ZG270-500
Medium carbon cast steel has certain toughness and plasticity, high strength and hardness, good machinability, acceptable weldability, and poor casting performance than low carbon steel. Casting defects cannot be avoided.
ZG270-500 Precision Casting
Cost-effective
Q345-B
The high strength of welding warping head.
Gypsy Wheel
Q345D
It has good comprehensive mechanical properties, good weldability, cold and hot workability and corrosion resistance, and has good low temperature toughness (high strength, good welding performance).
Reduction Gearbox
Domestic second-tier brands
Poor quality and short service life.
Domestic first-line brand
Cost-effective and long service life.
*Homemade (recommended)
Good quality, high cost.
Cluth
ZG270-500
Medium carbon cast steel has certain toughness and plasticity, high strength and hardness, good machinability, acceptable weldability, and poor casting performance than low carbon steel. Casting defects cannot be avoided.
Q345-B
Good quality, high cost.
45
Good cutting performance, high hardness after quenching, good toughness and certain wear resistance after quenching and tempering. Good quality, high cost.
Brake
Q345-B
CCS regulations
Electric Motor Type
HENGLI and LANHAI brand
Good quality, cost-effective, long service life. Self-contained brake, high safety.
ABB/WEG/Siemens
Good quality, high cost, long delivery time.
Other brands
High power consumption, relatively poor quality.
Pedestal
Q235-B
Suitable for products with small loads.
Q345-B
High strength and good welding performance.
Part name
Other low quality suppliers
Result
Our factory
Consequence
Drum
To reduce costs, reduce the thickness of the drum.
The thickness of the drum is too thin, which is not conducive to the load and wears quickly.
Produced in strict accordance with product production standards, with moderate thickness.
The thickness is moderate, which is good for loading, wears slowly, and does not cause the product to be too heavy to increase the transportation cost.
Warping head
ZG270-500
Casting defects cannot be avoided
Q345-B
High welding strength and slow wear.
Gypsy Wheel
Cast iron
Cast iron has good casting performance, but when the carbon content of cast iron is relatively high, its performance is relatively brittle, and its tensile performance is relatively poor; it is easy to corrode and wear quickly, which is not conducive to load.
Q345D
The Q345D steel plate is preheated before welding to prevent the occurrence of cold cracks. And Q345D has good cold and hot working properties and corrosion resistance, and has good low temperature toughness. Conducive to load, slow wear.
Reduction Gearbox
Domestic second-tier brands
Poor quality and short service life.
Homemade or domestic first-line brands
Good quality and cost-effective.
Cluth
ZG270-500
Casting defects cannot be avoided.
Q345-B
Good quality and cost-effective.
Brake
Q345-B
Good quality and cost-effective.
Q345-B
Good quality and cost-effective.
Electric Motor Type
Other brands
High power consumption, relatively poor quality.
HENGLI or LANHAI brand
Cost-effective, good quality. Self-contained brake, high safety.
Pedestal
Q235-B
Low strength, suitable for products with small overload; Used for heavy loads winches, wear out quickly and break easily.
Q345-B
Higher strength, slower wear, not easy to break, suitable for both small and large load winches.
Due to the fierce market competition, the phenomenon of low quality of other winch suppliers is frequent. What is the difference between us and other low-quality suppliers?
The specific differences are as follows:
Main Parameter
Chain Dia
Working Load
Supporting Load
Working Speed
Mooring Pull
Mooring Speed
Drum Capacity
Motor Power
mm
kN
kN
m/min
kN
m/min
m
kW
14/16/17.5
8.3/10.9/13.0
51/67/80
≥9
8
≥12
φ11*100
4.3/1.7
19/20.5/22
15.3/17.9/20.6
95/110/126
≥9
15
≥12
φ13*120
8.5/3.5
24/26
24.5/28.7
149/175
≥9
20
≥12
φ15*120
28/30
33.3/38.3
202/231
≥9
30
≥12
φ18*150
11/11/7.5
32/34/36
43.5/49.1/55.1
261/294/329
≥9
40
≥12
φ20.5*150
16/16/11
38/40/42
61.4/68.0/75.0
365/402/442
≥9
50
≥12
φ20.5*150
22/22/16
44/46/48
82.3/89.9/97.9
483/526/570
≥9
60
≥12
φ26*200
30/30/22
Above specifications only for reference, we can supply various winches according to your requirements.
Installation Process — Reference
1. The positioning of the base of the marine winch from the centre line of the ship, the frame number position and the height from the midline of the deck must meet the requirements of the base drawing.
2. The installation and inspection of the marine winch base are qualified.
3. When using a steel backing plate, the plane of the base fixing backing plate should be processed first, the flatness is ≤2mm, the surface roughness is Ra3.2, and the outward slope is 1:100.
4. After installing the marine winch, use the hanging wire method or the laser method to confirm the horizontal axis of the marine winch drum, the tolerance is 3mm/m, and the height and the distance from the midship position are ±5mm, and the inspection is qualified.
5. Whisk with steel backing plate.
6. Epoxy resin casting pad.
7. Prepare copper gaskets. Before the winch fixing bolts are tightened, check that the gap between the winch base and the base fixing pad is less than 0.5mm, and no gaskets are allowed; when it is greater than 0.5mm, it is allowed to have no more than 3 thin copper gaskets, and it is not allowed Use a half sheet of spacers.
Related products for "Electric Anchoring Winch"
