Hydraulic Anchor Winch
Application
Hydraulic anchor winch is a combination of anchor windlass and mooring winch. A hydraulic anchor winch is a type of winch that is used on boats and ships to anchor the vessel in place. It is powered by a hydraulic motor and consists of a winch drum that is used to store a length of anchor chain or rope. The hydraulic anchor winch is typically mounted on the deck of the vessel and is controlled by an operator using a control panel or remote control. The operator can use the winch to control the movement of the anchor chain or rope and adjust the tension on it to ensure that the vessel remains securely anchored in place.
Advantages and Features
1. High strenght, high performance;
2. Compact structure, high security;
3. Corrosion resistance, long lifespan;
4. Easy installation, easy maintenance;
5. With or without warping head.
6. With single or double anchor chain gypsy.
7. Local control or remote control.
8. Manual or hydraulic clutch and brake.
9. General motor or explosion-proof motor.
10. Can be customized according to your requirements;
11. Certificate: ABS BV, LR...
Hydraulic Anchor Winch Structure
We not only provide customers with high-quality products, but also provide complete system solutions and added services for specific customers. Therefore, There are high competitiveness.
Configuration options
Part Name
Type/Material
Advantages/Disadvantages
Drum
Q235-A
It has good toughness and plasticity, has a certain elongation, and has good weld-ability and hot work-ability. Q235A is generally used in the hot-rolled state. CCS no longer needed Q235A.
Q235-B
Has a certain elongation, strength, good toughness and cast-ability, easy to stamp and welding. Suitable for products with small loads.
Q345-B
Good comprehensive performance, good low temperature performance, good cold stamping performance, good welding performance and machinability. (High strength, good welding performance).
Warping head
ZG270-500
Medium carbon cast steel has certain toughness and plasticity, high strength and hardness, good machinability, acceptable weldability, and poor casting performance than low carbon steel. Casting defects cannot be avoided.
ZG270-500 Precision Casting
Cost-effective
Q345-B
The high strength of welding warping head.
Gypsy Wheel
Q345D
It has good comprehensive mechanical properties, good weldability, cold and hot workability and corrosion resistance, and has good low temperature toughness (high strength, good welding performance).
Reduction Gearbox
Domestic second-tier brands
Poor quality and short service life.
Domestic first-line brand
Cost-effective and long service life.
*Homemade (recommended)
Good quality, high cost.
Cluth
ZG270-500
Medium carbon cast steel has certain toughness and plasticity, high strength and hardness, good machinability, acceptable weldability, and poor casting performance than low carbon steel. Casting defects cannot be avoided.
Q345-B
Good quality, high cost.
45
Good cutting performance, high hardness after quenching, good toughness and certain wear resistance after quenching and tempering. Good quality, high cost.
Brake
Q345-B
CCS regulations
Hydraulic Motor Type
DONGFANG and XINHONG brand
Good quality, cost-effective, long service life. With brake, high safety.
Other brands
High power consumption, relatively poor quality.
Pedestal
Q235-B
Suitable for products with small loads.
Q345-B
High strength and good welding performance.
Due to the fierce market competition, the phenomenon of low quality of other winch suppliers is frequent. What is the difference between us and other low-quality suppliers?
The specific differences are as follows:
Part name
Other low quality suppliers
Result
Our factory
Consequence
Drum
To reduce costs, reduce the thickness of the drum.
The thickness of the drum is too thin, which is not conducive to the load and wears quickly.
Produced in strict accordance with product production standards, with moderate thickness.
The thickness is moderate, which is good for loading, wears slowly, and does not cause the product to be too heavy to increase the transportation cost.
Warping head
ZG270-500
Casting defects cannot be avoided
Q345-B
High welding strength and slow wear.
Gypsy Wheel
Cast iron
Cast iron has good casting performance, but when the carbon content of cast iron is relatively high, its performance is relatively brittle, and its tensile performance is relatively poor; it is easy to corrode and wear quickly, which is not conducive to load.
Q345D
The Q345D steel plate is preheated before welding to prevent the occurrence of cold cracks. And Q345D has good cold and hot working properties and corrosion resistance, and has good low temperature toughness. Conducive to load, slow wear.
Reduction Gearbox
Domestic second-tier brands
Poor quality and short service life.
Homemade or domestic first-line brands
Good quality and cost-effective.
Cluth
ZG270-500
Casting defects cannot be avoided.
Q345-B
Good quality and cost-effective.
Brake
Q345-B
Good quality and cost-effective.
Q345-B
Good quality and cost-effective.
Hydraulic Motor Type
Other brands
High power consumption, relatively poor quality.
DONGFANG or XINGHONG brand
Cost-effective, good quality. With brake, high safety.
Pedestal
Q235-B
Low strength, suitable for products with small overload; Used for heavy loads winches, wear out quickly and break easily.
Q345-B
Higher strength, slower wear, not easy to break, suitable for both small and large load winches.
Drawing of Hydraulic Anchor Winch
Main Technical Parameter
|
Chain Dia |
Working Load |
Supporting Load |
Working Speed |
Mooring Pull |
Mooring Speed |
Drum Capacity |
Motor Power |
|
mm |
kN |
kN |
m/min |
kN |
m/min |
m |
kW |
|
14/16/17.5 |
8.3/10.9/13.0 |
51/67/80 |
≥9 |
8 |
≥12 |
φ11*100 |
5.5 |
|
19/20.5/22 |
15.3/17.9/20.6 |
95/110/126 |
≥9 |
15 |
≥12 |
φ13*120 |
7.5 |
|
24/26 |
24.5/28.7 |
149/175 |
≥9 |
20 |
≥12 |
φ15*120 |
11 |
|
28/30 |
33.3/38.3 |
202/231 |
≥9 |
30 |
≥12 |
φ18*150 |
15 |
|
32/34/36 |
43.5/49.1/55.1 |
261/294/329 |
≥9 |
40 |
≥12 |
φ20.5*150 |
22 |
|
38/40/42 |
61.4/68.0/75.0 |
365/402/442 |
≥9 |
50 |
≥12 |
φ20.5*150 |
30 |
|
44/46/48 |
82.3/89.9/97.9 |
483/526/570 |
≥9 |
60 |
≥12 |
φ26*200 |
37 |
|
Above specifications only for reference, we can supply various winches according to your requirements. |
|||||||
Hydraulic Anchor Winch in Factory
Repair and Maintenance Advice
As a marine safety equipment, the maintenance of the marine hydraulic winch is an important part. How to carry out the maintenance of the marine hydraulic winch?
1.The driver must carefully maintain all parts of the winch every day, remove the dirt when off work, check or drive the car before work, pay attention to whether the lubrication condition is good, and do not use dirty or unqualified lubricants when adding lubricants. And often pay attention to whether the temperature rise is normal.
2.When the winch fails, it is not allowed to continue working reluctantly. The maintenance worker should be notified and assist the maintenance worker to eliminate the failure. The maintenance worker must conduct a comprehensive inspection of the winch on a regular basis to prevent failures and accidents. And make maintenance records.
3.If the winch is left unused for a long time, appropriate measures should be taken to protect it from corrosion or damage.
Related products for "Hydraulic Anchor Winch"
