Introduction:
Marine aluminum pressure gauges are essential instruments used in marine and offshore applications to measure and monitor fluid pressure in various systems. These gauges are specifically designed to withstand the harsh conditions encountered in marine environments, including high humidity, saltwater exposure, and vibration.
The primary purpose of a marine aluminum pressure gauge is to provide accurate and reliable pressure readings, allowing operators to monitor fluid systems and ensure they are operating within safe parameters. They are commonly used in systems such as hydraulic systems, fuel systems, cooling systems, and compressed air systems on ships, boats, offshore platforms, and other marine vessels.
Here are some key features and characteristics of marine aluminum pressure gauges:
1. Material: Marine pressure gauges are constructed using high-quality aluminum alloy, which offers excellent corrosion resistance, durability, and lightweight properties. The aluminum casing protects the internal components from environmental factors such as moisture and saltwater exposure.
2. Pressure Range: Marine pressure gauges are available in a wide range of pressure ratings to accommodate different applications. The pressure range typically varies from a few hundred psi (pounds per square inch) to several thousand psi.
3. Dial Display: The gauge features a clear and easy-to-read dial display that indicates the pressure measurement. The dial is usually marked with pressure units such as psi, bar, or kilopascal (kPa), allowing for quick and accurate pressure readings.
4. Accuracy: Marine pressure gauges are designed to provide precise and reliable pressure measurements. They are often engineered to meet specific accuracy standards, such as ±1% or ±2% of the full-scale reading.
5. Shock and Vibration Resistance: Marine environments can be subject to significant vibrations and shocks, especially on vessels navigating rough seas. Marine pressure gauges are built to withstand these conditions, utilizing robust internal mechanisms and shock-absorbing components to maintain accurate readings.
6. Corrosion Resistance: Aluminum pressure gauges are highly resistant to corrosion caused by exposure to saltwater and other corrosive elements commonly found in marine environments. This corrosion resistance ensures the longevity and performance of the gauge even in harsh conditions.
7. Mounting Options: Marine pressure gauges come with various mounting options, including direct panel mounting, surface mounting, and flush mounting. These options allow for flexible installation and integration into different marine systems.
It's important to note that marine aluminum pressure gauges should be selected based on the specific requirements of the application, including pressure range, accuracy, and environmental conditions. Regular maintenance and calibration are also necessary to ensure their continued accuracy and reliability.
Technical Specification:
|
Dial diameter |
Type and feature |
Model code |
Measuring Range |
Accuranse |
Connection |
Material |
|
|
Radical type |
Ⅰ |
|
0～0.06 -0.1～0 |
2.5 |
M14×1.5 |
Iron |
|
|
60 |
Radical back side type |
Ⅱ |
T |
||||
|
75 |
Radical back square |
|
TF(TY) |
||||
|
1.6 |
|||||||
|
100 |
Axial type |
Ⅳ |
Z |
||||
|
150 |
Axial side type |
Ⅲ |
ZT |
||||
Pressure Gauge's Mounting Dimensioon
|
D |
D1 |
A |
B |
d0 |
d1 |
|
60 |
82 |
|
|
72 |
Φ4.5 |
|
75 |
98 |
77 |
39 |
88 |
Φ4.5 |
|
100 |
125 |
|
|
116 |
Φ4.5 |
|
107 |
135 |
|
|
118 |
Φ6 |
|
150 |
183 |
|
|
162 |
Φ6.5 |
Pressure Gauge Connection Thread Dimension
|
Dial diameter |
Connection Dimension |
||
|
d |
L(mm) |
d1(mm) |
|
|
60 |
M14×1.5 |
12 |
Φ5 |
|
75 |
G³/8" |
16 |
Φ5.5 |
|
100 |
M20×1.5 |
20 |
Φ5.5 |
|
150 |
|||
Thermometer drawing:
Related products for "Marine Aluminum Pressure Gauge"
