UQK-01-C-Z Controller
General:
The UQK-01-C-Z Controller is a versatile device used for various control and automation applications. While I couldn't find specific information on the UQK-01-C-Z Controller, I can provide you with a general introduction to controllers and their typical functionalities.
Controllers are electronic devices that monitor and regulate the operation of systems or processes. They receive input signals from sensors, analyze them, and generate appropriate control signals to maintain desired conditions or optimize performance. The UQK-01-C-Z Controller likely follows a similar principle.
Some common features and capabilities of controllers include:
1. Input and Output Interfaces: Controllers typically have input ports to receive signals from sensors or other devices, and output ports to send control signals to actuators or other equipment.
2. Control Algorithms: Controllers employ various control algorithms to process input signals and generate appropriate control actions. These algorithms can be simple or complex, depending on the complexity of the system being controlled.
3. Setpoint and Feedback Control: Controllers often operate based on a setpoint, which is the desired value or condition that the controller tries to maintain. They continuously compare the setpoint with feedback signals received from sensors and adjust the control signals accordingly.
4. PID Control: Proportional-Integral-Derivative (PID) control is a widely used control algorithm. It adjusts the control signals based on the error (difference between setpoint and feedback) and its derivative and integral over time, allowing for precise control and response.
5. Communication and Connectivity: Modern controllers often have communication capabilities, such as Ethernet or serial ports, to connect with other devices or systems. This enables data exchange, remote monitoring, and control.
Technical Parameter:
|
Model |
Model type |
Working pressure |
Working temperature |
Float diameter |
Material |
||
|
|
|
|
|
|
Float |
Flange |
Shield housing |
|
UQK-01-C |
Side-mounting basic type |
1MPa |
150℃ |
Φ56 |
SUS304 |
SUS304 |
ZL102 |
|
UQK-01L-C |
Side-mounting extension type |
1MPa |
150℃ |
Φ56 |
SUS304 |
SUS304 |
ZL102 |
|
UQK-01Y-C |
Side-mounting different type |
1MPa |
150℃ |
Φ56 |
SUS304 |
SUS304 |
ZL102 |
|
UQK-02-C |
Side-mounting large type |
1MPa |
150℃ |
Φ56 |
SUS304 |
SUS304 |
ZL102 |
|
UQK-03-C |
Top mounting |
1MPa |
150℃ |
Φ56 |
SUS304 |
SUS304 |
ZL102 |
|
UQK-03W-C |
Top mounting bend pole type |
1MPa |
150℃ |
Φ56 |
SUS304 |
SUS304 |
ZL102 |
|
UQK-□-C-□-F |
Anti-corrosive type |
1MPa |
150℃ |
Φ56 |
SUS304 |
SUS304 |
ZL102 |
|
UQK-□-C-F |
Exponsion-proof type |
Explosion-poof type: Exd II CT3-T6 Intrnsically sate type: with safety barier Exia II CT3-T6 |
|||||
Drawing:
Related products for "UQK-01-C-Z Controller "
