3 m³ Oil Water Separator Manufacturer
The YSZ series 15ppm bilge water separator is provided with automatic/manual heating, automatic oil discharge, automatic alarm and automatic recording of the operating procedure. Manual oil discharge may be adopted when necessary. This Equipment is suitable in particular for use on ships of high degree of automation.
Technical Specifications
No.
Name
Material
1
Base
Assembly
2
Ball valve DN20
Assembly
3
Pump foundation
Assembly
4
Bilge water pump
Assembly
5
Solenoid valve(normally opened)
Assembly
6
Sampling ports
Assembly
7
The 15ppm Bilge Water alarm
Assembly
8
Electric control box
Assembly
9
Stop valve
Assembly
10
Pressure gauge
Assembly
11
Nameplate
Assembly
12
Ball valve
Assembly
13
Thermocouple Interface
Assembly
14
Solenoid valve(normally closed)
Assembly
15
Electrode
Assembly
16
Equipment body
Q235-B
17
Flushing water inlet DN32
Assembly
18
Ball valve DN20
Assembly
19
Dialysis unit
Assembly
20
Solenoid valve(normally closed)
Assembly
21
Flushing water inlet DN32
Assembly
22
Safety valve
Assembly
23
Solenoid valve(normally closed)
Assembly
24
Solenoid valve(normally opened)
Assembly
25
Solenoid valve(normally closed)
Assembly
26
Solenoid valve(normally closed)
Assembly
27
Solenoid valve(normally closed)
Assembly
28
Ball valve DN20
Assembly
29
Ball valve DN40
Assembly
30
Electric heater
Assembly
Mod.
Treatment capacity m3/h
Discharge standard
Working pressure
Motor power (kw)
Electric heating power(kw)
Power supply
YSZ-3.0
3
≤15ppm, satisfying(IMO)MEPC.107(49)
≤0.3MPa
1.1
2~3
3Ph/380V/50Hz; or 3Ph/440V/60Hz;
External Interface Size | |||||
Standard discharging outlet(DN) | Exceed standard discharging outlet(DN) | Oil-discharge outlet(DN) | Back flushing inlet(DN) | Clean water inlet(DN) | Oily water inlet(DN) |
40 | 40 | 25 | 32 | 32 | 50 |