ZYG(S) Series Marine Hydrophore
Brief Description
This water tank is appropriate for the water supply system(fresh water, seawater) on board. It can be used as marine fresh water tank or washing water tank. It can be used for supplying fresh water or washing water for all persons of the ship. It is also can be formed a complete set with air compressor and use for supplying fresh water for all building.
Main Products
| ZYG(S) Series Marine Hydrophore | ||
|
|
|
|
|
|
|
|
No.
name
material
1
Ball valve
SS 316L
2
Stop check valve
Assembly
3
Air valve
Assembly
4
Pressure controller
Assembly
5
Pressure gauge
Assembly
6
Safety valve
Assembly
7
Globe valve
Assembly
8
Level gauge
Assembly
9
Tank
CCS-B
10
Electric control box
Assembly
11
Vortex pump
Assembly
12
Base
6.3#
13
Nameplate
SS 316L
14
Pipe
CCS-B
Technical Specifications
Principle description
Model
Overall Size (mm)
Base Size (mm)
Water Outlet of Upper Tank
Water Outlet of Nether Tank
Draining Outlet
DN
L
B
H
a
b
DN
ZYG(S)-0.2
500
1150
720
1596
1050
600
40
25
20
ZYG(S)-0.3
500
1135
735
2077
1050
600
ZYG(S)-0.4
600
1240
756
1920
1080
600
ZYG(S)-0.5
650
1306
895
1982
1190
780
32
ZYG(S)-0.6
650
1306
895
2220
1190
780
The device uses the pressure water pumped by water pump in tank to compress air so as to keep the water in tank under a proper pressure for the use on board.
1.Liquid level meter: to show the water level condition in tank.
2.Pressure gauge: to show the pressure in tank.
3.Pressure controller: to control the start and stop of water pump. When the pressure in tank is under 0.3Mpa, the water pump will start to feed water into tank until the pressure reaches 0.4Mpa.
4.Safety valve: When the pressure in tank is more than 0.42Mpa, the safety valve will open to release the pressure in tank.
5.Charge valve: to charge the compressed air into tank.
6.Discharging valve: to empty the water in tank when maintaining.
7.Control box: The control box is designed with two control modes, one is manual control, the other one is auto control.
Maintenance
1.Check the tightness of connectors and cocks of suction pipeline so as to avoid the air is sucked in.
2.Check the tightness of charge valve
3.Check whether the pressure in tank is in control range. If the pressure is too low for a long time, please open the charge valve to fill in appropriate quantity of air.
4.Remove and clean the water tank regularly. After cleaning and brushing the inner wall, determine whether repaint according to flaking condition of painting. Repaint the out surface with anti-corrosive paint, meanwhile, replace wearing parts. After the spare parts are dry, reassemble it.
5.Speaking of maintenance of water pump, please see the instruction book of water pump.
Related products for "ZYG(S) Series Marine Hydrophore"
ZYG(S)-0.2 Marine 
ZYG(S)-0.3 Marine 
ZYG(S)-0.4 Marine 
ZYG(S)-0.5 Fresh Water 
ZYG(S)-0.6 Marine 
