• HOME
  • COMPANY
  • PRODUCTS
  • PROJECTS
  • NEWS
  • PRODUCTS
    Sea Water to Drinking Water Plant

    Sea Water to Drinking Water Plant
    1. Sea Water to Drinking Water Plant Preface
    This sea water desalting plant is accommodate to the seawater which average salinity is less than 35000ppm. The produced water is in accordance with your requirement when among this scale of seawater salinity. Quality of produced water meets National Drinking Water Standards (TDS≤600ppm). The main parts (membrane, high pressure pump and high pressure soft pipe) are warranty for a year free under the normal condition in terms of the request of operating-installation manuals. Requested environment conditions: environment temperature 0~45℃, seawater temperature 5~35℃, Humility 20%~95%.
    The functions of our device including raw water boosting and pre-treatment system, online monitoring device of reverse osmosis product water salinity, semiautomatic cleaning and fore & back flushing system with compressed air acceleration of sand filter.
    2. Performance of Sea Water to Drinking Water Plant
    (1) Sea water 35000ppm, for desalinating sea water into fresh water 500ppm.
    (2) Semi-automatic cleaning and back-flushing system equipped for sand filter.
    (3) There is over-pressure protection available for high pressure pump, when pressure is over 6.5Mpa, the system will shut down automatically.
    (4) High pressure pump equipped with low-pressure protection device, when pre-treated sea water pressure is less than 0.05Mpa, the system will shut down automatically.
    (5) Working parameter (Raw water flow, product flow, brine flow, operation pressure, product water conductivity)
    3. The System Requirements of Sea Water to Drinking Water Plant
    requirements of customer
    Fresh water standard comply with WHO
    Capacity: 6m3/day
    Salt content: ≤500mg/L
    requirements of the device
    Raw water: sea water
    Model of Reverse Osmosis: One stage Reverse Osmosis
    Purpose: Marine and offshore
    Power supply: 380V, 50HZ, 3P
    4. Sea Water to Drinking Water Plant Main Spare Parts

    Item

    Specification

    Unit

    Qty

    Remark

    Boost pump

    Capacity: 2.0m3/h,

    head: 40m

    Type: CHL2-40

    Set

    1

    SS316

    Sand filter

    Ф×H=250×1350mm

    Set

    1

    Glass  fibers

    Valve sets

    DF-56

    Set

    1

    Fine filter

    1×10"×5um

    Set

    1

    5-micron size

    Fine filter

    1×10"×10um

    Set

    1

    10-micron size

    Filter core

    10"-10u

    Set

    1

    Fiber

    Filter core

    10"-5u

    Set

    1

    fiber

    Motor

    Maker standard

    Set

    1

    2.2kw

    High pressure pump

    RT21.10

    Set

    1

    Belt

    A750

    Set

    2

    Motor wheel

    Maker standard

    Set

    1

    Membranes

    SW30-2540

    Set

    4

    Membrane shell

    Ropv

    Set

    4

    1000PSI

    Pressure adjust valve

    DN25

    Set

    1

    316L  needle valve

    Intel  water Pressure gauge

    0.7Mpa

    Set

    1

    High pressure inlet pressure

    Operation Pressure gauge

    10Mpa

    Set

    1

    Membrane inlet pressure

    Pressure gauge

    0.7Mpa

    Set

    1

    Flow meter

    Maker standard

    Set

    1

    sea water inlet flow meter

    Flow meter

    Maker standard

    Set

    1

    drinking water flow

    Conductivity meter

    CM320

    Set

    1

    0~2000us, Ac:0.1us

    Pressure switch

    BD-A3

    Set

    1

    0.065~1.2Mpa

    Safety valve

    SR3/8

    Set

    1

    Frame

    Mild steel

    Set

    1

    304

    Cleaning tank

    set

    1

    UPVC

    Piping system

    DN25DN15

    set

    1

    PPR

    5. Sea Water to Drinking Water Plant Several Class Certificates Supply:
    ABS, BV, DNV, GL, KR, RINA, NK, USCG and CCS class certificates.




    Contact with us now
    Name:
    Email:
    Message: