• HOME
  • COMPANY
  • PRODUCTS
  • PROJECTS
  • NEWS
  • PRODUCTS
    Marine Fresh Water Generator

    Marine Fresh Water Generator
    1. Marine Fresh Water Generator  Introductions
    This sea water desalting plant is accommodate to the seawater which average salinity is between 35000 and 38000 ppm. The produced water is in accordance with your requirement when among this scale of seawater salinity. Quality of produced water meets National Drinking Water Standards (TDS≤600ppm). The main parts (membrane, high pressure pump and high pressure soft pipe) are warranty for a year free under the normal condition in terms of the request of operating-installation manuals. Requested environment conditions: environment temperature 0~45℃, seawater temperature 5~35℃, Humility 20%~95%.
    The functions of our device including raw water boosting and pre-treatment system, online monitoring device of reverse osmosis product water salinity, semiautomatic cleaning and fore & back flushing system with compressed air acceleration of sand filter.
    2. The System Requirements of Marine Fresh Water Generator
    requirements of customer
    Fresh water standard comply with WHO
    Capacity: 15m3/day
    Salt content: ≤600mg/L
    requirements of the device
    Raw water: sea water
    Model of Reverse Osmosis: One stage Reverse Osmosis
    Purpose: Marine and offshore
    Power supply: 380V, 50HZ, 3P
    3. Marine Fresh Water Generator Performance
    (1) Sea water 35000-38000 PPM, for desalinating sea water into fresh water 600ppm.
    (2) Semi-automatic cleaning and back-flushing system equipped for sand filter.
    (3) There is over-pressure protection available for high pressure pump, when pressure is over 6.5Mpa, the system will shut down automatically.
    (4) High pressure pump equipped with low-pressure protection device, when pre-treated sea water pressure is less than 0.05Mpa, the system will shut down automatically.
    (5) Working parameter (Raw water flow, product flow, brine flow, operation pressure, product water conductivity)
    4. Marine Fresh Water Generator Technical Parameters
    Product: 15m3/day
    Raw water: 35000-38000 PPM
    Inlet temperature: 5~35℃
    PH value of Raw Water: 3.0~10.0
    Boosting inlet pressure: 0.1~1kg/cm2 (Positive)
    Salt content of product water: ≤600PPM
    Desalination rate: ≥98.5%
    Product water pressure: ≤0.3Mpa
    Recovery: ≈ 28%
    Power supply: 440VAC/60HZ/3φ
    Power consumption: ≈6.6KW(Include boost pump)
    Control cabinet: 220VAC
    Control voltage: 220VAC
    Potential-free extension for running indication and common alarm available.
    Motor: IP55
    Insulation class: “F”
    Outline: L×W×H=1350×650×1750mm
    Weight: Dry: ≈ 650kg
    Wet: ≈ 800kg
    5. Main Components of Marine Fresh Water Generator
    (1) Low speed high pressure triplex plunger: rubber damper of pump sets arranged already as per maker standard. The unit designed with a maximum pressure of 60 bar at a temperature of 25℃. This pump is the best in quality and performance in the market, which runs a very low number of revolutions which gives this pump a very high reliability against a low noise level. The pump is built together with a marine type electric motor of 2.2kW, belt driven.
    Capacity: 2m3/h
    Work pressure: 55bar
    Power supply: 3×380VAC, 50Hz, 2.2kw
    Protection class: IP55
    Insulation: F
    (2) Sand filter: made of fiber glass, the sand filer will remove suspended solids, mud, which the size is over 20mU. The filter tank equips semiautomatic valve  ensure fore and back-flushing, and keep treated sea water out of solid germs etc. which well accelerate back-flushing application.
    Volume: 150L
    Capacity: Max 2m3/h
    Working pressure & test pressure: 2~4bar & 6bar
    (3) Fine filters with replaceable and washable filter candles from 10 and 5 u.. The  unique design of the quick change filter candles .
    Capacity: Max 2m3/h
    Working pressure & test pressure: 2~4bar & 6 bar
    Filter element#1: 10u,
    Filter element#2: 5u
    (4) Membranes make DOW (USA). Those membranes are from the latest knowledge in membrane technology, the standards for membranes are continuously in progress by excessive study through DOW, they have reached the highest standard today.
    Model: SW30-2540
    Quantity: 4
    Configuration: Spiral wound
    Membrane Polymer: Composite Polyamide
    6. Marine Fresh Water Generator Several Class Certificates Supply:
    ABS, BV, DNV, GL, KR, RINA, NK, USCG and CCS class certificates.



    Contact with us now
    Name:
    Email:
    Message: