NEWS

Precautions When Using Marine Gangway

Preparations that should be done before use:

1. Ensure that all rivets, bolts, nuts and moving parts are tightly connected, the ladder columns and steps are firm and reliable, and the extension circlips and hinges are in good working condition.

2. The gangway should be kept clean and free of slippery substances such as grease, oil, wet paint, mud, snow, etc.

3. The operator's shoes are kept clean, and leather-soled shoes are prohibited.

Note:

1. It is forbidden to use the gangway when you are tired, take drugs, drink alcohol or have a physical disability.

2. The gangway should be placed on a firm and stable ground, and it is forbidden to place it on ice, snow or slippery ground without anti-skid and fixed equipment.

3. It is forbidden to exceed the marked maximum load-bearing quality during operation.

4. Prohibit the use of the gangway in strong winds.

5. The metal gangway is conductive, please avoid close to live places

6. When climbing, face the gangway, hold both hands firmly, and keep the center of gravity in the center of the ladder.

7. When working, do not stand on the steps within 1 meter from the top of the gangway, always keep the safety height of 1 meter, let alone climb the highest support point at the top.

8. Keep your hands above the top of your head so as not to lose your balance and be in danger when working.

9. It is forbidden to cross directly from one side of the gangway to the other.

10. Ambient temperature:-30 ℃ ~ + 60 ℃. 

11. When installing the connection point, it should rotate flexibly and there should be no block.

12.The selection size should be reasonable, the force size should be appropriate, and the stroke size of the piston rod should have a margin of 10 mm.