0.25 m³ Automatic oily Water Separator

0.25 m³ Automatic oily Water Separator

The device can be used to treat oily bilge water to meet the requirements of IMO.MEPC.107 (49), also known as 15ppm bilge water separator. It includes type approved 15ppm bilge separator, 15ppm bilge alarm and automatic closing device.

Drawing & Specifications

No.	Name	Material
1	the 1st stage coalescer	Assembly
2	the 2nd stage filter	Assembly
3	the 3rd stage membrane	Assembly
4	Base	Q235-B
5	Piston pump	Assembly
6	Air-electric transter	Assembly
7	Oil content meter	Assembly
8	Nameplate	SS
9	Electric control box	Assembly
10	Thermometer	Assembly
11	Nameplate	SS
12	Duplex pressure gauge	Assembly
13	air dischargeing cock	Copper
14	Vacuum pressure gauge	Assembly
15	Instrument panel	Q235-B
16	Manual three-way valve	Assembly
17	Pheumatic three-way valve	Assembly
18	Flow rate meter	Assembly
19	Pheumatic valve	Assembly
20	Electric heater	Assembly
21	Safety valve	Assembly
22	Ball valve	Assembly
23	header pipe to bilge	Assembly
24	Medical box	Plastic
25	Pipe	Assembly
26	Pipe
27	Pipe	Assembly
28	Medical pump	Assembly
29	pipeline	Assembly
30	Check valve	Assembly

Rated Capacity (m3/h)	Discharged Water Oil Content	Electric Heater Power (KW)	Electric Motor Power (KW)	Electrical System	Suction Head	Discharged Water Pressure	Outline Dimension (mm)(L×W×H)	Base	Dry Weight	Wet Weight	Applicable Vessel (KDWT)
0.25	≤15ppm	1	0.37	AC 380V/50Hz/3φ, AC 415V/50Hz/3φ, AC 440/60Hz/3φ, AC 480V/60HZ/3φ, etc.	≤6m (H2O)	5-10m (H2O)	1000 × 600 × 1250	5#	400	550	<1

IACS Certificate Options: BV, CCS, NK, DNV, GL, IRS, ABS, LR, RMRS, RINA