1.5 m³ Seawater Desalination Plant

1.5 m³ Seawater Desalination Plant

Brief Introduction

ZC-FSHB series seawater desalination equipment adopts the world most advanced technology which is the “Reverse Osmosis Membrane isolation technology” and it is the most advanced technology widely recognized in the world today. Our unit is efficiently practical and converts seawater into ultra clean clear drinking water free from odors and bacteria borne disease and etc. The product water had meets the national drinking water quality standard (GB5749-2006).

Marine seawater desalination equipment is specially designed according to the particularity of ship application. It has the advantages of small size, light weight, low footprint, convenient installation and strong adaptability. It can be installed in narrow and crowded cabins, decks, crew cabins, aisles and other spaces. The equipment is easy to operate and maintain. As long as there is seawater and electricity, fresh water can be provided immediately after starting. The equipment has high desalination rate, safe and reliable, avoids frequent cleaning and no environmental pollution. The frame is made of stainless steel, which is rust-proof and corrosion-resistant. The equipment has the advantages of compact structure, reliable performance, simple operation and maintenance, and can produce fresh water without mineralization and can be drunk directly. It is an ideal equipment to meet the needs of people living in seawater areas.

Drawings

Technical Specifications

Model	ZC-FSHB-1.5
water production(m³/d)	1.25
raw water TDS	≤38000PPM
Inlet water temperature(℃)	5~35℃
PH value of raw water	3~10
Boosting inlet pressure	0.1~1Kg/c㎡(Positive)
Salt content of product water	≤500PPM
Desalination rate	≥98.5%
Product water pressure	≤0.3MPa
Recovery rate	≈28%
Power supply	380V AC/50Hz/3φ
Power consumption	1.65KW
control cabinet	control voltage: 220V AC
	IP: IP55
Motor	IP: IP55
	Insulation class"F"
Outline Dimension L*W*H(mm)	930*440*1600
Dry weight(KG)	150KG
Wet weight(KG)	200KG

System component

1.Pre-filtration system: Feed pump, Multi medium filter, Precision filter

Multi-medium filter system medium filter adopts multi-layer size medium, can effectively remove the water suspended particles and fine particulate matter.

2.Reverse osmosis membrane system: High pressure pump, RO Membrane, Pressure Control Valve, Rinse Tank

Mainly to further process the pretreated raw water into fresh water.

Operating Parameters

Operating Pressure (MPa)＜6.5MPa

Concentration NaCl (PPM)＜35000PPM

Inflow Flow (m3/h): 2.5 m3/h

Feed Water Pressure (MPa): 0.1~0.3 MPa

Operating Temperature (℃): 5~40℃

PH range   Series run: 2~11

Short-term 30’rinse: 1~12

Feed water chlorine≤0.1mg/L

Power: 380V,50HZ，6.6kW

IACS Certificate Options: BV, CCS, NK, DNV.GL, IRS, ABS, LR, RMRS, RINA