2 m³ Ship Oil Water Separator Set

2 m³ Ship Oil Water Separator Set

Introduction

This device can be used to treat the oily bilge water in order to reach the requirements of IMO.MEPC.107 (49) resolution, which is also called 15ppm bilge separator.

It adopts the principles of first-stage inclined plate gravity and coalescence separation - second-stage fiber filter - third-stage ultrafiltration membrane permeation separation, etc., so that the oily bilge water can meet the IMO MEPC.107 (49) resolution discharge standard.

It contains type approved 15ppm bilge water separator, 15ppm bilge alarm and Automatic shut down Device.

Drawing & Specifications

No.	Name	Materail
1	the 1st stage coalescer	Assembly
2	the 2nd stage filter	Assembly
3	the 3rd stage membrane	Assembly
4	Base	8#
5	Piston pump	Assembly
6	Oil content meter	Assembly
7	Electric control box	Assembly
8	Air-electric transter	Assembly
9	two stage water inlet pipes	Assembly
10	Instrument panel	Assembly
11	Pheumatic valve	Assembly
12	Thermometer	Assembly
13	Nameplate	316L
14	Vacuum pressure gauge	Assembly
15	Duplex pressure gauge	Assembly
16	Nameplate	316L
17	Globe valve	Assembly
18	Back to the bilge	Assembly
19	Exhaust pipe	Assembly
20	Manual three-way valve	Assembly
21	Pheumatic valve	Assembly
22	Flow rate meter	Assembly
23	Safety valve	Assembly
24	Medical pump	Assembly
25	Medical box	Plastic
26	Three water inlet pipe	Assembly
27	Recoil hoses	Assembly
28	Electric heater	Assembly
29	Check valve	Assembly