3 m³ Oily Filtering Equipment

3 m³ Oily Filtering Equipment

Introduction

3 m³ Oily Filtering Equipment is mainly constituted by the 1st stage coalesce, the 2nd stage filter, the 3rd stage membrane, electric control box, oil content meter, MONO pump, pneumatic valve, pressure controller, temperature controller and so on. The combination offers of Bilge Separator include level controller and bottom valve.

The device adopts electrical heating; the 1st stage cone wave plate gravity and coalesce separation; the 1st and the 2nd stage fiber filter and the 3rd stage membrane permeation in order to make the treated bilge water meet the requirements of discharge standard of the resolution of IMP MEPC.107 (49).

No.	Name	Material
1	the 1st stage coalescer	Assembly
2	FLow rate meter	Assembly
3	Oil content meter	Assembly
4	Electric control box	Assembly
5	the 2nd stage filter	Assembly
6	the 3rd stage membrane	Assembly
7	Electric heater	Assembly
8	water inlet pipe	Q235-B
9	Base	Assembly
10	Nameplate	316L
11	Back to the bilge pipe	Assembly
12	Piston pump	Assembly
13	Medical pump	Assembly
14	Exhaust pipe	Q235-B
15	Medical box	Plastic
16	Backwashing water pipe	Q235-B
17	Three water inlet pipe	Q235-B
18	Nameplate	316L
19	Manual three-way valve	Assembly
20	Air-electric transter	Assembly
21	Thermometer	Assembly
22	Duplex pressure gauge	Assembly
23	Vacuum pressure gauge	Assembly
24	Instrument panel	Q235-B
25	Pheumatic valve	Assembly
26	Pheumatic three-way valve	Assembly
27	Check valve	Assembly
28	Safety valve	Assembly

Rated Capacity (m3/h)	Discharged Water Oil Content	Electric Heater Power (KW)	Electric Motor Power (KW)	Electrical System	Suction Head	Discharged Water Pressure	Outline Dimension (mm)(L×W×H)	Base	Dry Weight	Wet Weight	Applicable Vessel (KDWT)
3	≤15ppm	6	1.5	AC 380V/50Hz/3φ, AC 415V/50Hz/3φ, AC 440/60Hz/3φ, AC 480V/60HZ/3φ, etc.	≤6m (H2O)	5-10m (H2O)	1700×1500 ×1900	8#	1800	3200	100-200

IACS Certificate Options: BV, CCS, NK, DNV, GL, IRS, ABS, LR, RMRS, RINA