Bilge Water Clarifier

Bilge Water Clarifier

1. Main Function of Bilge Water Clarifier

The device adopts electrical heating; the 1st stage cone wave plate gravity and coalesce separation; the 1st and the 2nd stage fiber filter and the 3rd stage membrane permeation in order to make the treated bilge water meet the requirements of discharge standard of the resolution of IMP MEPC.107 (49).

2. Bilge Water Clarifier Description

This Device is used to separate oily water in bilge to make the discharge water meet the requirements of IMO MEPC.107 (49) Resolution. It is mainly constituted by the 1st stage coalescer, the 2nd stage filter, the 3rd stage membrane, electric control box, oil content meter, MONO pump, pneumatic valve, pressure controller, temperature controller and so on.

The combination offers of Bilge Separator include level controller and bottom valve.

3. Shut Down of Bilge Water Clarifier

The device can be started or stopped automatically according to the bilge level higher or lower after it is in a good operation condition and it doesn’t need man to operate. If the ship stops sailing for a very long time, the operator in the engine room can shut down the device if he is sure that the device doesn’t need operating. First, press the stop button on the Feeding pump and the pump stops working whose indicator light H3 goes out. Then cut off control power Q6 while K2, K20, K5, and K6 lose power source. The pneumatic valves Vs1, Vs2,  Vs3, Vs4, Vs6，Vs7 which are corre sponding to them reset to its former state automatically(Note:YWC-2.00,YWC-2.50,YWC-3.00,YWC-4.00,YWC-5.00pnenmatic valves VS1,VS2,VS3,VS4,VS5,VS6 its former atate automatically.
4. Bilge Water Clarifier Technical Datas

Type Technical Specifications		YWC-
		0.25	0.50	1.00	1.50	2.00	2.50	3.00	4.00	5.00
Rated  capacity (m3/h)		0.25	0.50	1.00	1.50	2.00	2.50	3.00	4.00	5.00
oil content of the discharged water		≤15ppm
Power of the electric heater（kw）		1kw	3kw	6	6	6	6	6	12	12
Electrical System		AC 380V/50Hz/3φ, AC 415V/50Hz/3φ, AC 440/60Hz/3φ, AC 480V/60HZ/3φ (optional)
Power of the electric motor		0.37kw	0.55kw	0.75kw	1.1kw	1.1kw	1.5kw	1.5kw	2.2kw	2.2kw
Suction head		≤6m-H2O
Pressure of the discharged water		5-10m-H2O
Outline Dimension（L×W×H）(mm)		1000× 600× 1250	1100× 690× 1460	1050× 1000× 1620	1100× 1130× 1650	1900× 1120× 1700	1900× 1120× 1900	1700× 1500× 1900	2280× 1700× 1900	2590× 2000× 1900
base		5#	6#	6#	6#	8#	8#	8#	10#	10#
Weight	Dry Weight	400	600	800	1060	1260	1500	1800	2100	2500
	Wet Weight	550	900	1200	1650	2260	2800	3200	3900	4600
Applicable Vessel (KDWT)		<1	1-5	5-10	10-30	30-50	50-100	100-200	100-300	>300

5. Certificate of Bilge Water Clarifier: CCS, EC, BV, DNV.GL , KR, LR, ABS, RINA approvable.