Bilge Water Separation Plant

Bilge Water Separation Plant

1. Principle of Bilge Water Separation Plant

The device adopts the combination of 1st stage cone plate gravity and coalesce separator; 2nd stage fiber filter, and 3rd stage membrane permeation, in order to make the treated bilge water to reach the requirements of discharge standard of the Resolution of IMO MEPC.107 (49).
As shown in the enclosed drawing，bilge water comes into the 1st stage separator, inside it is a vacuum negative pressure stage by the suction of the feeding pump, and it effectively prevents the problem that the bilge water is difficult to be separated because of the emulsion caused by feed pump under pressure. The liquid coming out of Feeding pump is adsorbed and filtered by the 2nd stage fiber filter, and then goes into the 3rd stage membrane to reach the discharge standard.
There is a 15ppm bilge alarm in the ship cabin to measure the oil content of effluent. If it finds that the oil content of effluent is in an excess of limit, the oil content meter can make order to switch turn it into the 3rd stage, membrane treatment process.
The oil content meter will give an alarm if finds the oil content of effluent is above limit, and the unqualified water pneumatic three-way valve VS6 is opened automatically, so that the unqualified water is return to bilge, not to the overboard.

2. Bilge Water Separation Plant Technical Specifications

Type Technical Specifications		YWC-
		0.25	0.50	1.00	1.50	2.00	2.50	3.00	4.00	5.00
Rated  capacity (m3/h)		0.25	0.50	1.00	1.50	2.00	2.50	3.00	4.00	5.00
oil content of the discharged water		≤15ppm
Power of the electric heater（kw）		1kw	3kw	6	6	6	6	6	12	12
Electrical System		AC 380V/50Hz/3φ, AC 415V/50Hz/3φ, AC 440/60Hz/3φ, AC 480V/60HZ/3φ (optional)
Power of the electric motor		0.37kw	0.55kw	0.75kw	1.1kw	1.1kw	1.5kw	1.5kw	2.2kw	2.2kw
Suction head		≤6m-H2O
Pressure of the discharged water		5-10m-H2O
Outline Dimension（L×W×H）(mm)		1000× 600× 1250	1100× 690× 1460	1050× 1000× 1620	1100× 1130× 1650	1900× 1120× 1700	1900× 1120× 1900	1700× 1500× 1900	2280× 1700× 1900	2590× 2000× 1900
base		5#	6#	6#	6#	8#	8#	8#	10#	10#
Weight	Dry Weight	400	600	800	1060	1260	1500	1800	2100	2500
	Wet Weight	550	900	1200	1650	2260	2800	3200	3900	4600
Applicable Vessel (KDWT)		<1	1-5	5-10	10-30	30-50	50-100	100-200	100-300	>300

3. Drawing of Bilge Water Separation Plant

4. Certificates of Bilge Water Separation Plant: CCS, EC, BV, DNV.GL , KR, LR, ABS, RINA approvable.