CWP Series Marine Constant Pressure Water Supply Device - Marine Hydrophore - Hi-sea

CWP Series Marine Constant Pressure Water Supply Device

CWP Series Marine Constant Pressure Water Supply Device

Introduction of CWP Constant Pressure Water Supply Device

CWP series constant pressure water supply device applies to the domestic water supply of ships. And seawater and freshwater are applicable. It can be used as an alternative to pressure water tank.

System Structure

①.Base

②.Water pump

③.Stop check valve

④.Electric control box

⑤.Pressure controller

⑥.Safety valve

⑦.Pressure tank

⑧.Pressure gauge

Main Technical Specifications

Electric system

380V 50Hz

Power

1.5kw

Voltage stabilizing range

0.16-0.3MPa

Flow range

0-1m ³/ h

Liquid temperature

40 ℃

The liquid is clean liquid or light sewage

Working Principle


The water or mild polluted water from the water tank enters the suction port of the pump through the stop check valve, and is pumped by the pump into the diaphragm air pressure tank with built-in air bag for pressure accumulation and water supply to the water system.

The pressure in the air tank is controlled by the pressure switch. When the pressure in the trachea is lower than the starting pressure set by the pressure switch, the water pump is started to charge; when the pressure reaches the pump stop pressure set by the pressure switch, the pump stops.

If the pressure of the air pressure tank reaches the set take-off pressure of the safety valve, the safety valve will take off to ensure safety.

Picture of CWP Constant Pressure Water Supply Device

Contact with us now

Our mail: hs@cqhisea.com

replace