MGCG Marine Power Cable

MGCG Marine Power Cable

Applications

Marine shipboard power cables are used for power systems of cargo ships, Passenger vessels and Special-purpose vessels. For fixed installations on ships and offshore-units in all locations and open deck. The good screening qualities of the copper braid also reduce radio interferences and electrical influences to electronic installation. The cables meet the flame test requirement for bunched cables acc. to IEC 60332-3-22 and IEEE45-18.13, and perform to the SOLAS requirements. All cable materials are free of halogens. This design ensures that non corrosive and low toxic gases are emitted in case of fire. Therefore, these cables are especially suitable for the installation on passenger ships.

Cable Construction

1.Conductor:Annealed Stranded Bare Copper,Class 2

2. Insulation: HEPR (Crosslinked Hard grade Ethylene Propylene)

3.Filler or Tape

4.Armour:Separator tape,Bare copper braid,Separator tape

5.Sheath:Cross linked polychloroprene rubber

Standards

International: IEC 60092-351;IEC 60092-353; IEC 60092-359;IEC 60332-3-22

National:DIN 89158/98

Electrical Characteristics

1.Rated Voltage Uo/U(Um):600/1000V

2.Test Voltage:3500V

Usage Characteristics

Minimum installation temperature	-10 °C
Minimum operating temperature	-35 °C
Short-circuit max. conductor temperature	250 °C
Max. conductor temperature in service	85 °C
Rated Voltage Uo/U (Um)	0.6/1 kV
Test voltage	3500 V
Flame retardant	IEC 60332-3 Cat. A
Smoke density	IEC 61034
Electro magnetic interference resistance	Yes
Gases corrosivity	IEC 60754-2
Gases toxicity	No toxicity to IEC 60754-1
Standard	DIN VDE and IEC

Minimum Internal Bending Radius

1.For overall diameter of cables≤25mm 4×cable diameter

2.For overall diameter of cables>25mm 6×cable diameter