Marine Bronze Butterfly Valve

Marine Bronze Butterfly Valve

Introduction:

Featuring an aluminum bronze body, disc and nitrile rubber gasket, this butterfly valve is suitable for a variety of isolation tasks, especially marine applications. Manually operated with lockable lever or gearbox.

Configuration Options:

Name of Parts	Material	Advantages/Disadvantages
Valve Body	Bronze	Pressure resistance, wear resistance, and toughness are higher than those of brass. Bronze has a certain delay in the rusting time of the valve. The price is higher than brass
	Brass	Brass has low pressure resistance and is easy to rust. The price is lower than bronze.
Valve Disc	Stainless Steel	Stainless steel has a strong ability to resist tension, wear and corrosion. Stainless steel is much stronger than copper in material. Stainless steel will not produce corrosion, pitting, rust or wear and high temperature resistance.
	Bronze	Bronze has excellent low temperature resistance, good corrosion resistance, wear resistance, casting and excellent mechanical properties
Valve Seat	EPDM	Suitable medium -20-120℃ water, steam, etc
	NBR	Applicable medium 0-80℃ oil class
	PTFE	Applicable to corrosive media below 200℃
	Hard Alloy	Suitable for high temperature and high pressure environment
Handle	Bronze	It has good high temperature corrosion resistance and oxidation resistance. It has good corrosion resistance in the atmosphere, fresh water and sea water, and the machinability is acceptable. It can be welded and not easy to braze.
	Cast Iron	Cost less than bronze

Specific Differences Between Us and Other Suppliers:

Comparison
Product Picture of other low quality supplier		Product Picture of our factory
Other low quality supplier	Consequence	Our Factory	Result
Jerry-built, the valve body wall thickness does not follow the standard processing	Uneven thickness and material, it’s easy to damage the valve body.	Strictly in accordance with the standard processing	Customer use rest assured, to meet user needs, the product has long service life.
Use recovered waste valves as good valves.	It is easy to cause the shell to crack, and in severe cases, the oil and gas pipelines will explode.	Strictly in accordance with customer material requirements to manufacture new valves.	Meet the hardness and precision requirements of standard valves, Ensure the valve quality, ensure the normal operation of equipment.
Flange manufacturing quality is poor, there are cracks, pores, thickness is not enough and other problems	Lead to poor wear resistance of the valve, the valve is prone to quality problems, short service life.	Material selection in strict accordance with national standards	Valve wear resistance, pressure performance is good, not easy to damage
Bronze valve disc was replaced with cast iron valve disc in order to reduce costs.	Cast iron valve disc is prone to corrosion and damage	Material selection in strict accordance with national standards	High safety factor, reasonable structure

Outline Drawing:

Specifications:

Features:

Non-sticky: Almost all substances do not adhere to the Teflon film. Very thin films also show good non-stick properties.

Heat resistance: Teflon coating film has excellent heat resistance and low temperature resistance.It can withstand high temperature to 300°C in a short time

Sliding property: Teflon coating has a low coefficient of friction.The friction coefficient changes when the load is sliding, but the value is only between 0.05-0.15.

Moisture resistance: The surface of the Teflon film is free of water and oil, and it is not easy to be stained with solution during production operations.

Wear resistance: It has excellent wear resistance under high load.

Product Showing:

Certification: