Auto-tracking
and Locating Fire Monitor
Description:
Auto-tracking
and locating fire monitor utilizes the spectral rays emitted by natural
combustible materials when they burn. And then it supervises the fire source by
using special red-ultraviolet detection system. This fire monitor can monitor all
fires in the protected area in any position and any time. In case of a fire, the
device will start immediately and send an alarm
signal to the fire control center. At the same time, it will have a full range
of scanning. After locating the fire, it will aim at the fire quickly and accurately.
Then it will spray the extinguishing agent to the fire automatically.
Product
Superiority:
1. Automatic
2. Accurate
locating
3. Strong
anti-interference ability
Product Detail:
|
Model |
Flow range (L/S) |
Rated pressure (Mpa) |
Working pressure (Mpa) |
Protection radius
(m)
|
Rotation angle(°) |
Fire locating time(s) |
Working temperature
(℃)
|
Connecting way |
Installation way |
Installation height(m) |
|
ZDMS0.6 /5S |
5 |
0.6 |
0.4-0.8 |
30 |
0-360 |
≤30 |
-10~55 |
G1" connecting thread |
hoisting |
6~25 |
|
ZDMS0.6 /10S |
10 |
35 |
G1 1/4" |
|||||||
|
ZDMS0.8 /20S |
20 |
0.8-0.9 |
0.6-1 |
50 |
≤60 |
DN65 connecting
flange
|
||||
|
ZDMS0.9 /30S |
30 |
55 |
Picture 1 of ZDMS0.6/5S & ZDMS0.6/10S:
Picture 2 of ZDMS0.6/5S & ZDMS0.6/10S:
Picture 1 of ZDMS 0.8/20S & ZDMS 0.9/30S:
Picture 2 of ZDMS 0.8/20S & ZDMS 0.9/30S:
Related products for "Auto-tracking and Locating Fire Monitor"
