Fire Water Nozzle
Description:
Fire water nozzle is a fire extinguishing tool. It can spray dense and
substantial water flow when it is connected to fire hose. This can be used to extinguish
solid material fires by water column and put out charged fires, combustible
dust fires as well as some oil fires by water mist. Our company has many kinds
of water and foam fire nozzles.
Product
Superiority:
1. Long
jetting range
2. Small
recoil
3. Portable
Product detail:
Manual water nozzle:
Type: QLD5.0/4III-SX
Weight: 1.5 kg
Material
(body): hard anodized aluminum
Material
(handle): Horseshoe (Injection Molded Nylon red Handle)
Material
(Nozzle Bumper): Rubber
Swivel
Inle: 1.5" (40mm) recommended
Coupling:
Storz/NH/BSP/Russian type, etc.
Length:
230mm
Valve
Type: ABS ball valve, aluminum valve is available
Flow
Control Method : 50-100-150-230 L/min selectable,
Flush
function available to clean the nozzle to avoid something stucked
Working
Pressure: 6 bar
Max
Reach @ Max Flow: 20 m
Fog
Pattern Method: ABS Spinning teeth, stainless steel teeth is available
Max fog angle: 120°
Automatic pressure regulation water nozzle:
Type: QLD8.0/30-IV
Weight: 4.5 kg
Material (body): hard anodized aluminum
Material (handle): Horseshoe (Injection Molded Nylon red Handle)
Material (Nozzle Bumper): Rubber
Swivel Inlet: 2" (50mm) recommended
Length: 280mm
Valve Type: Ball Valve (Aluminum)
Flow Rate: 400-2000L/min (100-500GPM)
Flow Control Method: Automatic (constant pressure, variable flow, constant gallonage, flow does not change with pattern)
Working Pressure: 7 bar
Max Reach @ Max Flow: 60 m
Fog Pattern Method: Molded Rubber Teeth (fixed)
Max fog angle: 120°
Water wall nozzle:
Type: SX-WN (water wall nozzle)
Weight: 2.39 kg
Material (body): hard anodized aluminum
Material (water wall): Stainless steel
Swivel Inlet: 2" (50mm) recommended
Coupling: Storz/NH/BSP/Russian type, etc.
Flow Control Method: 500 L/M (135GPM)
Working Pressure: 10 bar
85-foot-wide, 23-foot-high wall of water.
Feature: a protective curtain of water. The water wall nozzle delivers 135GPM to form an 85-foot-wide, 23-foot-high wall of water
Piercing water nozzle:
Type: SX-PN (Piercing Nozzle)
Weight: 3.4kg
Material (body): hard anodized aluminum
Material (handle): Horseshoe (Injection Molded Nylon red Handle)
Material (Piercing Nozzle): stainless steel
Swivel Inlet: 1.5" (40mm) recommended
Coupling: Storz/NH/BSP/Russian type, etc.
Length: 235mm
Valve Type: ABS ball valve, aluminum valve is available
Flow Control Method: 120-480 L/M (30-125GPM)
Flush function available to clean the nozzle to avoid something stucked
Working Pressure: 6 bar
Max Reach @ Max Flow: 40 m
Fog Pattern Method: ABS Spinning teeth, stainless steel teeth is available
Max fog angle: 120°
Feature: small recoil make it suitable to work uneven place, say roof, slope and lift car.etc.
Application: It usually works for mow, cotton pile, coal yard. The sharp tip can pierce into them to inject water. So the fire can be put out inside effectively.
Automatic water nozzle with foam attachment:
Type: SX-AN-FA
Weight: 3 kg
Material (body): hard anodized aluminum
Material (handle): Horseshoe (Injection Molded Nylon red Handle)
Material (Nozzle Bumper): Rubber
Material (foam attachment): Hard anodized aluminum
Swivel Inlet: 2" (50mm) recommended
Length: 250mm
Valve Type: Slide Valve (Stainless)
Flow Rate: 200-760L/min (70-200GPM)
Flow Control Method: Automatic (constant pressure, variable flow, constant gallonage, flow does not change with pattern)
Working Pressure: 7 bar
Max Reach @ Max Flow: 50 m
Fog Pattern Method: Molded Rubber Teeth (fixed)
Max fog angle: 120°
Foam attachment: Aluminum, low foam attachment
Picture of Manual Water Nozzle:
Picture of Automatic Pressure Regulation Water Nozzle:
Picture of Water Wall Nozzle:
Picture of Piercing Water Nozzle:
Picture of Automatic Water Nozzle with Foam Attachment:
Related products for "Fire Water Nozzle"
