6% Anti-soluble Aqueous Film Forming Foam Fire Extinguishing Agent
Product overview
While diffusing on the surface of combustion liquid, the foam of this foam fire extinguishing agent also can rapidly drain liquid to cool the surface of combustion liquid. Moreover, the rapid diffusion of foam layer prevents the further heating, vaporization and combustion of the combustion liquid.
The anti-soluble aqueous film forming foam (AFFF) fire extinguishing agent is made of polymer biological adhesive, fluorine surfactant, hydrocarbon surfactant, stabilizer, freezing resistance agent, solvent and other polymer raw materials, which is a multifunctional and universal foam fire extinguishing agent. Moreover, it is mainly used to extinguish the fires caused by ethanol, ether, aldehyde, ester, ketone, alcohol and other polar liquid (water-soluble) as well as the fires caused by mixture of any of the above two and the fires caused by non-polar liquid (for example, the fires caused by unleaded vehicle gasoline and various water-soluble liquid). In addition, it also can be used to extinguish the fires caused by Class A substance, so it is of the general performance of fire extinguishing.
Standard& Certificate:
Standard: GB15308-2006 Foam Fire Extinguishing Agent; GB/T19001-2016/ISO 9001:2015; GB15308-2006;GB/T24001-2016/ISO 14001:2015; GB/T28001-2011/OHSAS 18001:2007, MSC.327(90), MSC/Circ.1312, etc.
Certificate: CCS
Specification:
Solidification point: -30℃ cold resistance, sea water resistance
Scope of application: It is a low expansion foam fire extinguishing agent.
Product packaging and storage:
This product is packed with plastic barrel in the following specifications: 25L, 200 L, or 1,000 L.
storage temperature : -25℃ to 45℃
Effective life :8 years
Applicable water category: fresh water and seawater, mixing ratio of 6%;
Solidification point (eigenvalue) : < -34℃;
Freezing resistance, thawing resistance: no visible stratification and heterogeneous;
PH value (before and after temperature treatment) : 8.1 to 8.6;
Surface tension (before temperature treatment):≤15.0mN/m;
Diffusion coefficient: positive value
Corrosion rate / [mg/(d.dm2)] : Q235A steel sheet: ≤0.3; 3A21 aluminum sheet: ≤0.1;
Foaming expansion rate (before temperature treatment):≥9.6;
The 25% drainage time (before temperature treatment): ≥ 12min;
Fire performance: Class ≥IA, mandatory foaming, fire extinguishing time ≤3min, fire resistance time ≥11min; Class ≥ARIB, fire extinguishing time ≤3min, fire resistance time ≥10min;
Picture of 6% AFFF/AR: