Low Viscosity Alcohol Resistant Fluoro-protein Foam Concentrate
Description:
FP/AR 3/6% low viscosity alcohol resistant fluoro-protein foam concentrate is formulated from hydrolyzed protein, fluorocarbon surfactant, microbial polysaccharide, foam stabilizer, antifreeze, preservative, etc.
The fire extinguishing agent can be mixed with water in a ratio of 3:97 or 6:94 to generate foam in a low-expansion foam generating device. It is used for the prevention and rescue of oil liquids and polar liquid fires such as alcohols, ethers, amines, oil fields, oil depots, ships, airports, petrochemical enterprises, chemical enterprises, etc.
The foam should be sealed and stored in a cool, dry and ventilated place indoors. The storage temperature should be lower than 45°C, higher than its minimum use temperature, and will not be affected by freezing and thawing. The validity period is two years.
It is customized cold-resistant and seawater-resistant products for you according to your needs.
Standard& Certificate:
Standard: GB15308-2006 Foam Fire Extinguishing Agent; GB/T19001-2016/ISO 9001:2015; GB15308-2006;GB/T24001-2016/ISO 14001:2015; GB/T28001-2011/OHSAS 18001:2007; MSC.327(90); MSC.339(91; MSC.1/Circ.1312, etc.
Certificate: CCS
Fire extinguishing mechanism:
Due to the introduction of fluorocarbon surfactants into the hydrolyzed protein molecules, the polymer compounds generated can be well compatible with microbial polysaccharides, forming a gel film on the surface of polar liquids to protect the fire-extinguishing foam layer from being damaged by polar liquids , so that the fire extinguishing agent can extinguish ordinary oil liquid fires, and can also extinguish ordinary chemical polar liquid fires, and it also has the advantages of low price and can be used in combination with dry powder fire extinguishing agents. Solvent-resistant foam extinguishing agent.
Specification:
Model |
Mixture ratio |
Solidification point & Applicable water category |
|
3%(FP/AR) |
3% |
-14℃ sea water resistance |
|
6%(FP/AR) |
6% |
-10℃ |
-10℃ sea water resistance |
Item |
condition |
parameter |
Solidification point |
before temperature treatment |
0-4℃(eigenvalue) |
Freezing resistance & thawing resistance |
before and after temperature treatment |
no visible stratification and heterogeneous |
Fluidity |
before and after temperature treatment |
The flow rate of the foam liquid≥the flow rate of the standard reference liquid or the viscosity value of the foam liquid≤the viscosity value of the standard reference liquid |
Sediment (%) |
before aging |
≤0.25;Precipitate can pass through 180μm sieve |
After aging |
≤1.0;Precipitate can pass through 180μm sieve |
|
pH Value |
before and after temperature treatment |
6.0~9.5 |
Corrosion rate / [mg/(d.dm2)] |
before temperature treatment |
Q235A steel sheet: ≤15.0, LF21aluminum sheet: ≤15.0 |
Foaming expansion rate |
before and after temperature treatment |
The deviation from the eigenvalue≤1.0 or≤20% of the eigenvalue, which is determined by the larger of the above two differences |
The 25% drainage time |
before and after temperature treatment |
The deviation from the eigenvalue≤20% |
Fire extinguishing performance |
IIA Class |
fire extinguishing time ≤4min |
Anti-burn time ≥10min |
||
ARIIB |
fire extinguishing time ≤5min |
|
Anti-burn time ≥10min |
Picture of low viscosity alcohol resistant fluoro-protein foam concentrate: