Horizontal Electric Single Arm Wiper
Description:
Horizontal Electric single Wiper is a new type of electrical products for ship cabin porthole wiper. It takes the driving motor as the power source, through the reduction and transmission mechanism, with the shell as the guide rail, drives the rubber scraper installed at the lower end of the scraping rod, and does parallel scraping test on the porthole glass, so that the porthole window stays clear when the waves and rain beat and snow fall.
Application:
It is an electrical product suitable for scraping the porthole of ship cab and operating studio.
Approved Standard:
Chapter 1 and 2, Part Three, Chapter 1 and 3, Part Four of China Classification Society Rules for Classification of Sea-Going Steel Ships 2015 and its Amendments.
This product conforms to the standard of CB1366-2002 "General Specification for wipers for Ships".
Product Characteristic:
1. Adopt imported wiper motor.
2. With overheat self-stop protection device.
3. The scraping test area is wide.
4. The controller adopts full digital circuit control.
5. The wiring end is the screw latch.
6. The size of the control box has a variety of specifications for users to choose.
Technical specification:
|
Power supply |
Frequency |
Wipe speed |
Protection grade |
Consumed power of motor |
Consumed power of heater |
Single arm |
|
AC 220V/ AC 110V |
50Hz/ 60Hz |
0.3～1.2m/s |
IP56 |
≤90W |
≤450W |
MAX 1600mm |
Related products for "Horizontal Electric Single Arm Wiper"
