1 m³ Oil Water Separator Treator
Introduction
This device can be used to treat the oily bilge water in order to reach the requirements of IMO.MEPC.107 (49) resolution, which is also called 15ppm bilge separator.
The device adopts electrical heating; the 1st stage cone wave plate gravity and coalesce separation; the 1st and the 2nd stage fiber filter and the 3rd stage membrane permeation in order to make the treated bilge water meet the requirements of discharge standard of the resolution of IMP MEPC.107 (49).
No.
Name
Materail
1
the 1st stage coalescer
Assembly
2
the 2nd stage filter
Assembly
3
Flow rate meter
Assembly
4
the 3rd stage membrane
Assembly
5
Vacuum pressure gauge
Assembly
6
Nameplate of product
316L
7
Instrument panel
Assembly
8
Duplex pressure gauge
Assembly
9
Safety valve
Assembly
10
air dischargeing cock
Assembly
11
Thermometer
Assembly
12
Electric control box
Assembly
13
Check valve
Assembly
14
Air-electric transter
Assembly
15
Ball valve
Assembly
16
Pheumatic valve
Assembly
17
Base
Q235-B
18
Oil content meter
Assembly
19
Medical pump
Assembly
20
Piston pump
Assembly
21
Fixed mount of electric box
Assembly
22
Manual three-way valve
Assembly
23
Pheumatic three-way valve
Assembly
24
Medical box
Plastic
25
Electric heater
Assembly
26
Ball valve
Assembly
≤6m
(H2O)
5-10m
(H2O)
1050
×
1000
×
1620
IACS Certificate Options: BV, CCS, NK, DNV, GL, IRS, ABS, LR, RMRS, RINA
Rated Capacity (m3/h)
Discharged Water Oil Content
Electric Heater Power (KW)
Electric Motor Power (KW)
Electrical System
Suction Head
Discharged Water Pressure
Outline Dimension (mm)(L×W×H)
Base
Dry Weight
Wet Weight
Applicable Vessel (KDWT)
1
≤15ppm
6
0.75
AC 380V/50Hz/3φ, AC 415V/50Hz/3φ, AC 440/60Hz/3φ, AC 480V/60HZ/3φ, etc.
6#
800
1200
5-10