Marine Calorifier Unit

Marine Calorifier Unit

1. Marine Calorifier Unit Application
This series marine calorifier unit is suitable for heating fresh water on the ship or platform, heated fresh water for crew use.
2. Marine Calorifier Unit Main Technical Parameters

Model	DRG-
Model	0.12	0.2	0.3	0.5	1.0
Capacity（m³）	0.12	0.2	0.3	0.5	1.0
Working pressure （MPa）	0.4（60℃）
Design pressure（MPa）	0.44
Test pressure（MPa）	0.66
Safety valve open pressure（MPa）	0.42
Water inlet temperature（℃）	15
Water outlet temperature （℃）	65
Working temperature（℃）	0~65
Design temperature（℃）	80
Heated water capacity（kg/h）	180	360	540	720	900
Electrical heating power（kW）	12	24	36	48	60
The thickness of the external thermal layer（mm）	40
The thickness of outer galvanized sheet steel（mm）	0.7
Electricity	AC380、50Hz、3φ/AC440V、60Hz、3φ

3. Marine Calorifier Unit Operation method
(1) Adjust the temperature control range.
Set the low temperature controller and high temperature controller to 50℃ and 65℃.
(2) Set the open pressure of safety valve
Set the open pressure of safety valve. When the pressure in tank is over 0.42MPa, the safety valve will take off to release the pressure in tank.
(3) Normal operation
Open the water inlet and outlet valve. Start the electric heater. When the temperature in tank is lower than 50℃, the device will start automatically until the temperature reaching 65℃.

4. Marine Calorifier Unit General Drawing

5. All kinds class certificate of Marine Calorifier Unit can be supply.

Related products for "Marine Calorifier Unit"