Auto-tracking and Locating Fire Monitor

Auto-tracking and Locating Fire Monitor

Description:

Auto-tracking and locating fire monitor utilizes the spectral rays emitted by natural combustible materials when they burn. And then it supervises the fire source by using special red-ultraviolet detection system. This fire monitor can monitor all fires in the protected area in any position and any time. In case of a fire, the device will start immediately and send an alarm signal to the fire control center. At the same time, it will have a full range of scanning. After locating the fire, it will aim at the fire quickly and accurately. Then it will spray the extinguishing agent to the fire automatically.

Product Superiority:

1. Automatic

2. Accurate locating

3. Strong anti-interference ability

Product Detail:

Model	Flow range (L/S)	Rated pressure (Mpa)	Working pressure (Mpa)	Protection radius (m)	Rotation angle(°)	Fire locating time(s)	Working temperature (℃)	Connecting way	Installation way	Installation height(m)
ZDMS0.6 /5S	5	0.6	0.4-0.8	30	0-360	≤30	-10~55	G1" connecting thread	hoisting	6~25
ZDMS0.6 /10S	10			35				G1 1/4"
ZDMS0.8 /20S	20	0.8-0.9	0.6-1	50		≤60		DN65 connecting flange
ZDMS0.9 /30S	30			55

Picture 1 of ZDMS0.6/5S & ZDMS0.6/10S:

Picture 2 of ZDMS0.6/5S & ZDMS0.6/10S:

Picture 1 of ZDMS 0.8/20S & ZDMS 0.9/30S:

Picture 2 of ZDMS 0.8/20S & ZDMS 0.9/30S: