CJ86 VFD Armored Marine Power and Control Cable - Marine Power Cable - Hi-sea

CJ86 VFD Armored Marine Power and Control Cable

CJ86 VFD Armored Marine Power and Control Cable

Applications

This product is used in ships,petrol platforms and offshore buildings for power,light and control systems,usually used for fixed installation in most areas and open deck in ships.Design to meet requirements for Variable Frequency Drivers (VFD).If the cable is exposed to direct sun light protective covering or cable with black outer sheath is recommended.

Constructions

1.Conductor

Stranded copper wire Class 5(Flexible)

2.Insulation

XLPE

3.Bedding

Separate tape

4.Screen

Copper tape,covering 100%

5. Amore

Copper wire braided,covering 90% Tinned copper wire on request

6.Sheath

Thermoplastic Polyolefine(SHF1),On requesting Thermosetting Polyolefine(SHF2)

Standard colour black, other colours on request.

Applied Standards

Design IEC 60092-353
Conductor IEC 60228 Class 5
Insulation IEC 60092-351
Armor IEC 60092-350
Sheath IEC 60092-359
Flame-retardant IEC 60332-1-2 -test for single insulated wire and cable IEC 60332-3-22 -test for bunched wires and cables, category A
Halogen-free IEC 60754 series
Smoke emission IEC 61034 series
Transfer Impedance IEC 61196-1 (typical value 26dB over 1mΩ/m at 100MHz [20mΩ/m])

Service Conditions

1.Rated Voltage:1,8/3kV (3,6kV)

2.long time working temperature 90℃

3.Minimum recommended installation temperature -15 °C

Lowest operation temperature -40 °C

4.flexible cables for mobile devices,the other cables are fixed laying cable bending radius while laying is as below

Cable Structure Cable Outer Diameter Minimum Bending Radius
Metal Braided Armored 6D
Non Armored D≤25 4D
D>25 6D

Contact with us now

Our mail: hs@cqhisea.com

replace