Open FRP Lifeboat

Open FRP Lifeboat

The Scope of Application:

Open Lifeboat can be used in the severe condition, and can be used to rescue as well as lifesaving.

Product Characteristic:

Open Lifeboat is made from fiber reinforced plastic (FRP), between its inner hull and outer hull is filled with polyurethane foams to offer sufficient buoyancy. If damages occur to the boat body under water, the buoyant hull can still provide sufficient buoyancy to enable the boat to sail on the safety water surface. Oil-resistance foam fenders are equipped on both sides of the Open Lifeboat, and two layers of fixture rubber are installed outside to facilitate replacement. Steel handrails are installed on both sides of the boat for occupants. Self-discharging deck ensures quick discharge of water in the boat. Open Lifeboat is also armed with air case to meet requirements of roll on ships, LSA, MSC81 (70).

Adopt Standard:

Open Lifeboat is designed and built to the latest SOLAS regulations, LSA and MSC 81.(70).

Open Lifeboat is fitted with the latest "Spearhead" On- Off load rescue Boat release systems which can evacuate crew safely and efficiently from vessels and offshore platforms.

Open Lifeboat is also armed with air case to meet requirements of roll on ships, LSA, MSC81 (70).

Product Specification:

Dimension	Capacity	Hook distance	Engine	Total weight
3.5*1.5*0.65	7	2.0	1100/ZX2105	964
5.5*2.0*0.85	16	4.5	S1100M/ZX2105J	2535
6.0*2.0*0.85	18	5.08	ZX2105C-1	3161
6.5*2.15*0.9	21	5.5	295C/ZX2105J	3270
7.5*2.5*1.05	30	6.5	ZX2105J	4100
7.5*2.5*1.05	43	6.5	ZX2105J	5970
8.0*2.6*1.1	50	7.0	ZX2105C-1	6766
8.5*3.0*1.2	60	7.5	ZX2105C-1	7616
9.0*3.2*1.2	72	8.0	ZX2105C-1	9327

Photo Two of Open FRP Lifeboat: