CHJP86 Armoured Instrumentation and Communication Cable
Applications:
This product is used in ships,petrol platforms and offshore buildings for power,light and control systems,usually used for fixed installation in most areas and open deck in ships.If the cable is exposed to direct sun light protective covering or cable with black outer sheath is recommended.
Constructions:
1.Conductor -Stranded copper wire
2.Insulation
-XLPE
3.Twisted pair
- two insulated cores twisted together to form a pair
- plastic coated aluminium tape and a tinned copper drain wire
4. Bedding - filler tape
5. Armor
- drain wire copper (in all sizes)
- copper wire braid, coverage >94% EC 60092-350
- tinned copper wire braid on request
6. Sheath
- polyolefine plastic, SHF1 EC 60092-359
- on request, thermosetting polyolefine, SHF2
- standard colour grey, other colours on request
Applied Standards:
| Design | IEC 60092-353 |
| Conductor | IEC 60228 Class 2 |
| Insulation | IEC 60092-351 |
| Sheath | IEC 60092-359 |
| Flame-retardant | IEC 60332-1-2 -test for single insulated wire and cable IEC 60332-3-22 -test for bunched wires and cables, category A |
| Halogen-free | IEC 60754 series |
| Smoke emission | IEC 61034 series |
| Transfer Impedance | IEC 61196-1 (typical value 26dB over 1mΩ/m at 100MHz [20mΩ/m]) |
Electrical data:
Loop resistance of pair, max. / +20°C Pair capacitance, nom. / 800Hz Loop inductance, nom. Insulation resistance / +20°C
Service Conditions:
1.Rated Voltage:150/250V(300V)
2.long time working temperature 90℃
3.Minimum recommended installation temperature -15 °C Lowest operation temperature -40 °C
4.flexible cables for mobile devices,the other cables are fixed laying cable bending radius while laying is as below
| Cable Structure | Cable Outer Diameter | Minimum Bending Radius |
| Metal Braided Armored |
|
6D |
| Non Armored | D≤25 | 4D |
| D>25 | 6D |
Related products for "CHJP86 Armoured Instrumentation and Communication Cable"
