High Strength Shipbuilding Steel Plate
High strength shipbuilding steel plate is a kind of marine steel plate which is used for shipbuilding and offshore platforms.Its tensile strength is from 450MPa to 660 MPa and nominal upper yield strength from 315MPa to 390MPa.In general, the actual yield strength exceeds nominal yield strength figure.
We can supply you a full selection of steel grades, such as BVAH32, BVDH36, BVEH40. You can customize the plate size and properties as well. All high strength shipbuilding steel plates are with certificates provided by renowned classification societies, such as ABS, CCS, DNV, GL, LR, RINA,BV, KR, NK. If you have any interest, please feel free to leave your inquire.
Stock Sizes:
Thickness Range: 6~350mm
Width Range: 900~4850mm
Length Range: 3000~25000mm
Available Super High Strength Shipbuilding Steel Plate:
|
Adopted Standard |
Steel Grade |
|
ABS Grade |
AB/AH32, AB/AH32N, AB/DH32, AB/DH32N, AB/EH32, AB/EH32N, AB/FH32, AB/FH32N, AB/AH36, AB/AH36N, AB/DH36, AB/DH36N, AB/EH36, AB/EH36N, AB/FH36, AB/FH36N, AB/AH40, AB/AH40N, AB/DH40, AB/DH40N, AB/EH40, AB/EH40N, AB/FH40, AB/FH40N |
|
BV Grade |
BVAH32, BVDH32, BVEH32, BVFH32, BVAH36, BVDH36, BVEH36, BVFH36, BVAH40, BVDH40, BVEH40, BVFH40 |
|
CCS Grade |
CCSAH32, CCSDH32, CCSEH32, CCSFH32, CCSAH36, CCSDH36, CCSEH36, CCSFH36, CCSAH40, CCSDH40, CCSEH40, CCSFH40 |
|
GL Grade |
GL-A32, GL-A32TM, GL-D32, GL-D32TM, GL-E32, GL-E32TM, GL-F32, GL-F32TM, GL-A36, GL-A36TM, GL-D36, GL-D36TM, GL-E36, GL-E36TM, GL-F36, GL-F36TM, GL-A40, GL-A40TM, GL-D40, GL-D40TM, GL-E40, GL-E40TM, GL-F40, GL-F40TM |
|
KR Grade |
KRAH32, KRDH32, KREH32, KRFH32, KRAH36, KRDH36, KREH36, KRFH36, KRAH40, KRDH40, KREH40, KRFH40 |
|
LR Grade |
LRAH32, LRDH32, LREH32, LRFH32, LRAH36, LRDH36, LREH36, LRFH36, LRAH40, LRDH40, LREH40, LRFH40 |
|
NK Grade |
KA32, KD32, KE32, KF32, KA36, KD36, KE36, KF36, KA40, KD40, KE40, KF40 |
|
RINA Grade |
RINA-AH32, RINA-DH32, RINA-EH32, RINA-FH32, RINA-AH36, RINA-DH36, RINA-EH36, RINA-FH36, RINA-AH40, RINA-DH40, RINA-EH40, RINA-FH40 |
We can also provide angle steel, bulb flat, half-round steel, steel channel, carbon structural steel and high strength low alloy structural steel according to GB 712-2011, GB T 9945-2012, EN10067 and etc., with certificate.
Related products for "High Strength Shipbuilding Steel Plate"
