Marine Calorifier
1. Marine Calorifier Introduction
Marine Calorifier also known as hot water tanks mainly help ships use the fresh water in the fresh water pressure tank to supplement the hot water tanks. They are used in series. The marine hot water tank uses steam or clean water in the electric heating tank to provide domestic pressure hot water to the ship or drilling platform. Used by the entire ship. The marine pressure hot water tank is also the key auxiliary equipment for the stable operation of various equipment in the ship.
2. Main Products
| Marine Calorifier | ||
|
|
|
|
| Model | DRG- | ||||
| 0.12 | 0.2 | 0.3 | 0.5 | 1 | |
| Capacity（m3） | 0.12 | 0.2 | 0.3 | 0.5 | 1 |
| Working pressure （MPa） | 0.4（60℃） | ||||
| Design pressure（MPa） | 0.44 | ||||
| Test pressure（MPa） | 0.66 | ||||
| Safety valve open pressure（MPa） | 0.42 | ||||
| Water inlet temperature（℃） | 15 | ||||
| Water outlet temperature （℃） | 65 | ||||
| Working temperature（℃） | 0~65 | ||||
| Design temperature（℃） | 80 | ||||
| Heated water capacity（kg/h） | 180 | 360 | 540 | 720 | 900 |
| Electrical heating power（kW） | 12 | 24 | 36 | 48 | 60 |
| The thickness of the external thermal layer（mm） | 40 | ||||
| The thickness of outer galvanized sheet steel（mm） | 0.7 | ||||
| Electricity | AC380、50Hz、3φ/AC440V、60Hz、3φ | ||||
| Model | ZRG- | ||||
| 0.12 | 0.2 | 0.3 | 0.5 | 1 | |
| Capacity （m3） | 0.12 | 0.2 | 0.3 | 0.5 | 1 |
| Working pressure（MPa） | 0.6（60℃） | ||||
| Design pressure （MPa） | 0.7 | ||||
| Test pressure （MPa） | 1.05 | ||||
| Safety valve open pressure（MPa） | 0.63 | ||||
| Water inlet temperature（℃） | 15 | ||||
| Water outlet temperature （℃） | 65 | ||||
| Working temperature （℃） | 0~65 | ||||
| Design temperature（℃） | 80 | ||||
| Steam pressure （MPa） | 0.3 | ||||
| Heating water capacity（kg/h） | 275 | 450 | 750 | 1200 | 3250 |
| steam consumption（kg/h） | 27.5 | 45 | 75 | 120 | 325 |
| The thickness of the external thermal layer（mm） | 40 | ||||
| The thickness of outer galvanized sheet steel（mm） | 0.7 | ||||
| Model | ZDR- | ||||
| 0.12 | 0.2 | 0.3 | 0.5 | 1 | |
| Capacity（m3） | 0.12 | 0.2 | 0.3 | 0.5 | 1 |
| Working pressure（MPa） | 0.4（60℃） | ||||
| Design pressure（MPa） | 0.44 | ||||
| Test pressure（MPa） | 0.68 | ||||
| Safety valve open pressure（MPa） | 0.42 | ||||
| Water inlet temperature（℃） | 15 | ||||
| Water outlet temperature（℃） | 65 | ||||
| Working temperature（℃） | 0~65 | ||||
| Design temperature（℃） | 80 | ||||
| Steam pressure （MPa） | 0.3 | ||||
| Heated water capacity（kg/h） | 275 | 450 | 750 | 1200 | 3250 |
| Steam consumption（kg/h） | 27.5 | 45 | 75 | 120 | 325 |
| Heated water capacity（kg/h） | 90 | 140 | 180 | 280 | 540 |
| Electrical heating power（kW） | 6 | 9 | 12 | 18 | 36 |
| Electricity | AC380/50Hz/3φ, AC440V/60Hz/3φ(Optional) | ||||
| The thickness of the external thermal layer（mm） | 40 | ||||
| The thickness of outer galvanized sheet steel（mm） | 0.7 | ||||
The hot water tank can be combined to use with fresh water pressure tank on board, that is to use fresh water in pressure tank to replenish this tank, and then heated by heating elements for usage of entire vessel.
Temperature adjusting valve: open and close it according to the set temperature control range.
Pressure gauge: to show the pressure in tank.
Thermometer: to show the water temperature in tank.
Safety valve: If the pressure in tank is more than 0.63MPa, the safety valve will open to release the pressure in tank.
5. Picture of Marine Calorifier
Related products for "Marine Calorifier"
DRG Series Electric Heating
ZRG Series Steam
ZDR Series Steam-Electric 
