Aluminum heat welding mold

Description

Aluminum heat welding is a method in which a metal is heated by a superheated molten metal generated by an exothermic reaction between a metal oxide and a metal aluminum to achieve bonding.

The commercial application of this welding process dates back to Germany in the late nineteenth century, when aluminum reduced iron oxide was used to make castings and repair broken joints. Later, this process was gradually promoted and applied to the connection of copper busbars between rails, power grounding systems and cathodic protection.

The welding process is simple in operation, does not require an external power source and heat source, and has low welding cost and stable and reliable quality, and is very suitable for welding operations of field cables and other metal components.

Features and advantages

1. The current interception flow at the solder joint is equal to the wire;

2. The solder joint is permanent and will not cause high resistance due to looseness or corrosion;

3. The solder joints are like copper and are tougher than copper itself and are not affected by corrosive products;

4. The solder joint can withstand repeated large surge (fault) currents without degradation;

5. The welding operation method is simple and easy to use;

6. The device is light and easy to carry;

7. When welding, no external power source or heat source is required;

8. The quality of the weld can be checked from the appearance;

9. It can be used for welding copper, copper alloy, copper plated steel, various alloy steels including stainless steel and high resistance heating heat source materials.

Specification

Aluminum hot flux

NO.	Specification	Model
1	10	HL-10
2	15	HL-15
3	20	HL-20
4	30	HL-30

Aluminum heat welding mold

Name	Specification	Flux usage	Model
Aluminum heat welding mold	6 mm²cable single-point	12 g	HJ-10
	6 mm²cable docking	12 g	HJ-10
	6 mm²cable T connection	12 g	HJ-10
Aluminum heat welding mold	10 mm²cable spot welding	15 g	HJ-15
	10 mm²cable docking	15 g	HJ-15
	10 mm²cable T connection	15 g	HJ-15
Aluminum heat welding mold	16 mm²cable spot welding	20 g	HJ-20
	16 mm²cable docking	20 g	HJ-20
	16 mm²cable T connection	20 g	HJ-20
Aluminum heat welding mold	25 mm²cable spot welding	25 g	HJ-25
	25 mm²cable docking	25 g	HJ-25
	25 mm²cable T connection	25 g	HJ-25
Aluminum heat welding mold	35 mm²cable spot welding	30 g	HJ-30
	35 mm²cable docking	30 g	HJ-30
	35 mm²cable T connection	30g	HJ-30
Aluminum heat welding mold	50 mm²c able spot welding	45 g	HJ-45
	50 mm²cable docking	45 g	HJ-45
	50 mm²cable T connection	45 g	HJ-45
Auxiliary supplies	Ignition powder	burning torch	It can be used more than 50 times.

Related products for "Aluminum heat welding mold"