30 Persons Simplified Marine Sewage Processor
Introduction
The Sewage Treatment Plant device is mainly constituted by aeration tank,contact oxidation tank, settling tank, membrane tank, cutting pump, air pump, discharge pump, electric control box, membrane module,UV sterilizer and accessories of pipe lines.
The SWCM (I) marine domestic sewage treatment plant uses the principles of activated sludge, contact oxidation and membrane bioreactor (MBR) to eliminate organic pollutants. Membrane bioreactor can treat wastewater efficiently, thoroughly and cleanly, so that the discharged water can meet the new IMO standards and other more stringent requirements.
Equipment List
No. |
Name |
Amount |
1 |
Main body (includes aeration tank, contact oxidation tank, settling tank, membrane tank) |
1set |
2 |
Cutting pump |
1set |
3 |
Air pump |
1set |
4 |
Discharge pump |
1set |
5 |
UV disinfectant |
1set |
6 |
Membrane module |
1set |
7 |
Electric control box |
1set |
8 |
Piping accessory of device |
1set |
Type |
SWCM(Ⅰ)-30 |
Rated/MaxCapacity |
30persons/33persons |
Total Suspended Solids |
≯35mg/l |
Biochemical Oxygen Demand(BOD5)
|
≯25mg/l |
Thermotalerant Coliform Standard |
≯100/100ml |
Chlorine Residual |
≯0.5mg/l |
Chemical Oxygen Demand(COD) |
≯125mg/l |
PH |
6~8.5 |
Main Component Data | ||
Cutting pump |
Type:0.5CWF-8 |
1Set |
Material (shell, impeller, shaft):Assembly |
||
Capacity:5m3/h |
||
Power and protection grade:0.75KW F class |
||
Air pump |
Type:2RB 210-7AH16T |
1Set |
Material (shell, impeller, shaft):Assembly |
||
Capacity:80m3/h |
||
Power and protection grade:0.55KW F class |
||
Discharge pump |
Type:25ZB-2-20 |
1Set |
Material (shell, impeller, shaft):Assembly |
||
Capacity: 2m3/h |
||
Power and protection grade:0.75KW F class |
||
UV disinfectant |
Type:JX-0.5UV |
1Set |
Power Supply:AC220V 50HZ 3P |
||
Electric control box |
Type:321DF-1M-01YL |
1Set |
Power Supply: |