MGH Marine Power Cable
Standards : DIN 89160
Applications
Halogen free cable is used for fixed laying on ships and off-shore units, use in all rooms and on open board, as power,signalling and control cables. A more specic design (e. g. screening) is necessary for installations in radio stations or above the upper metallic deck. The cables meet the ame test requirements for bunched cables acc. to IEC 60332-3 and IEEE 45-18.13, and perform to the SOLAS requirements. For xed installations on ships and offshore-units in all locations.Meet the Flame test requirements for bunched cables according to IEC 60332-3-22&IEEE 45-18.13.Free halogen materials ensures that non corrosive and low toxic gases are emitted in case of fire. All cables materials are free of halogens. This design ensures that non corrosive and low toxic gases are emitted in case of re. Therefore, these cables are especially suitable for the installation on passenger ships.
Construction
1.Conductor : Annealed Stranded Bare Copper,Class 2
2.Insulation : HEPR (Crosslinked Hard grade Ethylene Propylene)
3.Filler or Tape
4.Sheath : Polyolefin
Electrical Characteristics
Rated Voltage Uo/U(Um):600/1000V
Test Voltage:3500V
Usage Characteristics
Flame Retardant:IEC 60332-3 Cat. A
Smoke Density:IEC 61034
Gases Corrosivity:IEC 60754-2
Gases Toxicity:No toxicity to IEC 60754-1
Minimum Internal Bending Radius
| Cable Structure | Cable Outer Diameter | Minimum Bending Radius |
| Metal Braided Armored | 6D | |
| Non Armored | D≤25 | 4D |
| D>25 | 6D |
Related products for "MGH Marine Power Cable"
