Bilge Water Clarifier
1. Main Function of Bilge Water Clarifier
The device adopts electrical heating; the 1st stage cone wave plate gravity and coalesce separation; the 1st and the 2nd stage fiber filter and the 3rd stage membrane permeation in order to make the treated bilge water meet the requirements of discharge standard of the resolution of IMP MEPC.107 (49).
2. Bilge Water Clarifier Description
This Device is used to separate oily water in bilge to make the discharge water meet the requirements of IMO MEPC.107 (49) Resolution. It is mainly constituted by the 1st stage coalescer, the 2nd stage filter, the 3rd stage membrane, electric control box, oil content meter, MONO pump, pneumatic valve, pressure controller, temperature controller and so on.
The combination offers of Bilge Separator include level controller and bottom valve.
3. Shut Down of Bilge Water Clarifier
The device can be started or stopped automatically according to the bilge level higher or lower after it is in a good operation condition and it doesn’t need man to operate. If the ship stops sailing for a very long time, the operator in the engine room can shut down the device if he is sure that the device doesn’t need operating. First, press the stop button on the Feeding pump and the pump stops working whose indicator light H3 goes out. Then cut off control power Q6 while K2, K20, K5, and K6 lose power source. The pneumatic valves Vs1, Vs2, Vs3, Vs4, Vs6，Vs7 which are corre sponding to them reset to its former state automatically(Note:YWC-2.00,YWC-2.50,YWC-3.00,YWC-4.00,YWC-5.00pnenmatic valves VS1,VS2,VS3,VS4,VS5,VS6 its former atate automatically.
4. Bilge Water Clarifier Technical Datas
|
Type Technical Specifications |
YWC- |
|||||||||
|
0.25 |
0.50 |
1.00 |
1.50 |
2.00 |
2.50 |
3.00 |
4.00 |
5.00 |
||
|
Rated capacity (m3/h) |
0.25 |
0.50 |
1.00 |
1.50 |
2.00 |
2.50 |
3.00 |
4.00 |
5.00 |
|
|
oil content of the discharged water |
≤15ppm |
|||||||||
|
Power of the electric heater（kw） |
1kw |
3kw |
6 |
6 |
6 |
6 |
6 |
12 |
12 |
|
|
Electrical System |
AC 380V/50Hz/3φ, AC 415V/50Hz/3φ, AC 440/60Hz/3φ, AC 480V/60HZ/3φ (optional) |
|||||||||
|
Power of the electric motor |
0.37kw |
0.55kw |
0.75kw |
1.1kw |
1.1kw |
1.5kw |
1.5kw |
2.2kw |
2.2kw |
|
|
Suction head |
≤6m-H2O |
|||||||||
|
Pressure of the discharged water |
5-10m-H2O |
|||||||||
|
Outline Dimension（L×W×H）(mm) |
1000× 600× 1250 |
1100× 690× 1460 |
1050× 1000× 1620 |
1100× 1130× 1650 |
1900× 1120× 1700 |
1900× 1120× 1900 |
1700× 1500× 1900 |
2280× 1700× 1900 |
2590× 2000× 1900 |
|
|
base |
5# |
6# |
6# |
6# |
8# |
8# |
8# |
10# |
10# |
|
|
Weight |
Dry Weight |
400 |
600 |
800 |
1060 |
1260 |
1500 |
1800 |
2100 |
2500 |
|
|
Wet Weight |
550 |
900 |
1200 |
1650 |
2260 |
2800 |
3200 |
3900 |
4600 |
|
Applicable Vessel (KDWT) |
<1 |
1-5 |
5-10 |
10-30 |
30-50 |
50-100 |
100-200 |
100-300 |
>300 |
|
.jpg)
Related products for "Bilge Water Clarifier"
